Interested in linking to "Process I/O: Great gadgets galore"?
You may use the Headline, Deck, Byline and URL of this article on your Web site. To link to this article, select and copy the HTML code below and paste it on your own Web site.
The ST-MIX12884 SixTRAK Combination I/O Module has 12 discrete inputs, 8 discrete outputs, 8 analog inputs, and 4 analog outputs. Up to 20 modules can be connected to the high-speed I/O bus of the company’s controllers, RTUs, and I/O gateways. The module is vibration and surge resistant, operates in temperatures ranging from -40 to +70°C, and is rated for CE, UL, CSA, and hazardous locations Class 1, Division 2 (Zone 2). Sixnet; 518/877-5173; www.sixnetio.com
Analog Signal Conditioners
SensorLex signal conditioners include the 8B40/41 analog voltage input module and the 8B39 current output module. In both, clamp circuits on the I/O and power terminals protect against harmful transients, have a high level of immunity to environmental noise, and are suitable for installation in Class I, Division 2 hazardous locations. They withstand temperatures of -40 to +85C and relative humidity range of zero to 95% noncondensing, and meet the requirements of EN61000-6-4 and -6-2. Dataforth; 800/444-7644; www.dataforth.com
Visidot automatic identification and data capture system reads assets labeled with standard 2D Data Matrix barcodes or with Visidot colorcodes. As assets pass in front, the reader captures hundreds of labels simultaneously and transmits the information to an image processing system, which decodes the data. Images can be stored in a separate Image Bank. A Site Management System controls the entire process. ImageID; 781/793-9380; www.visidot.com
Analog Input Module Takes All
The PACSystems RX3i Universal Analog module provides eight channels of 24 bit analog inputs, including 30 types of thermocouples, RTDs, resistance, current and voltage inputs. Channels can be individually configured using the company’s Proficy Machine Edition software. Six filter frequencies are individually selectable by channel. It has autocalibration, on-board error-checking, open-circuit detection, and short-circuit detection. GE Fanuc Automation; 717/285-4400; www.ge.com
Design-Build-Deliver Services and Solutions provide detailed engineering support for applications, expert design and engineering services, installation of I/O products, pre-assembled module design and production, industrial and ATEX certified custom enclosures, and custom marking for DIN rails, cable and conductors. The service works with the company’s products and third-party products. Weidmuller; 804/794-2877; www.weidmuller.com.mx
IEC Terminal Blocks
Models CBD, HMM and NCS high density IEC terminal blocks are available with screw clamp, spring clamp, and insulation displacement wire terminations, respectively. CBD accepts a wire range of 28 AWG to 4/0 cables. HMM will accept 2, 3, or 4 wire conductors in a single terminal block. NCS does not require a special tool for wire termination, and can handle a wire range of 20 AWG to 16 AWG,
Automation Systems Interconnect; 877/650-5160; www.asi-ez.com
ControlGlobal.com is exclusively dedicated to the global process automation market. We report on developing industry trends, illustrate successful industry applications, and update the basic skills and knowledge base that provide the profession's foundation.