Who's Winning?

The ARC/Control Top 50 Process Automation Companies. Find out who are the top vendors who supply automation professionals with the tools of their trade.

Share Print Related RSS
Page 1 of 2 « Prev 1 | 2 View on one page

By Walt Boyes and Larry O’Brien

It’s that time again−the time when we print in a few short pages a snapshot of the health of the vendors who supply automation professionals with the tools of their trade. In a word, their health is good. End users are having excellent years in most of the process segments and in many of the discrete manufacturing segments, with the significant exception of automotive. And because end users are having excellent years, they’re spending money with the automation suppliers, who are also having excellent years. At this point, the boom appears poised to continue for at least the time being.

This year, we’ve made a significant change. Instead of just doing a North American Top 50, with a nod of the head to global results, we’ve decided we need to produce two lists: A Global Top 50 that shows the real performance of the flat world of automation, and a North American Top 50, with numbers derived from global performance.

 - North American Top 50 Vendor (View PDF version here)

 - Global Top 50 Vendors (View PDF version here)
* When opening the PDF version note that the image will load in a new window. After image loads, click on image to enlarge

Defining Our Terms

Here’s what we are including in our definition of the fifty largest companies:

  • Process automation systems and related hardware software and services
  • PLC business, as well as related hardware, software, services, I/O and bundled HMI
  • Other control hardware components, such as third-party I/O, signal conditioners, intrinsic safety barriers, networking hardware, unit controllers and single and multiloop controllers
  • Process safety systems
  • SCADA systems for oil and gas, water and wastewater, and power distribution
  • AC drives
  • General motion control systems
  • Computer numerical control (CNC) systems
  • Process field instrumentation, such as temperature and pressure transmitters, flowmeters, level transmitters and associated switches
  • Analytical equipment, including process electrochemical, all types of infrared technology, gas chromatographs for industrial manufacturing and related products
  • Control valves, actuators and positioners
  • Discrete sensors and actuators
  • All kinds of automation-related software, from advanced process control, simulation and optimization to third-party HMI, plant asset management, production management (MES), ERP integration packages from the major automation suppliers and similar software
  • All other automation-related services provided by the automation suppliers
  • Condition-monitoring equipment and systems
  • Ancillary systems, such as burner management systems, QCSs for pulp and paper, etc.

What we’re not including are:

  • Pumps and motors
  • Robotics
  • Material-handling systems
  • Supply chain management software
  • Building automation systems
  • Fire and security systems
  • Processing equipment such as mixers, vessels, heaters, etc., as well as process design licenses from suppliers that have engineering divisions
  • Electrical equipment, such as low-voltage switchgear, etc.

As with last year’s list, we’ve found it nearly impossible to achieve a hard number for “process automation” only, so we’re reporting all automation. We believe our numbers are even more accurate than last year, although that may show some companies that have lost or gained ground, when they really have not, because we are correcting for either over- or underestimating them last year. All automation companies are showing gains over 2005, because of the growth of purchasing globally. The data is for 2006, as 2007 numbers are not yet available for many companies.

Strong Markets

The market for automation products is quite strong and may remain that way for as long as another six  to eight years, perhaps as far out as 2015. Large capital projects are the main drivers behind this growth rate, especially in India and China.

The strength of the market is based primarily on the fact that the oil and gas sector continues to be strong, as the price of oil continues to inch ever upward. ExxonMobil reports that it has major capital projects scheduled out as far as 2012, at least. The longevity of the boom is likely to be attributable to the shortage of skilled manpower and contracting companies with which to do the projects that companies have scheduled.

This is not an isolated phenomenon, nor is it limited to North America and Western Europe. The shortage of talent, both individual and company, appears to be a global problem that will not resolve itself soon.

“Overall, the market is doing very well, and most companies are growing at a healthy rate. Most of the big suppliers are still growing in the double digits, which is the highest growth we’ve seen in almost twenty years.
Every global region is experiencing real growth, including the Middle East, Eastern Europe, the former Soviet Union and South America. The trouble spot is North America.

Key economic indicators are beginning to slide, and the automotive industry, which is not only one of the largest economic sectors in North America, but also the largest consumer of automation products, is underperforming substantially, with consolidation and layoffs looming.

Page 1 of 2 « Prev 1 | 2 View on one page
Share Print Reprints Permissions

What are your comments?

You cannot post comments until you have logged in. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments