Integrated Controls Keep Cement Plants Nimble

Evolution and Benefits of Cement Plants’ Automation and Control Systems Technology

Share Print Related RSS

Some people do more with less. A very few do a lot more with less.

For instance, Portland cement kilns have expanded their capacity over the years from producing hundreds of tons per day to upwards of 10,000 tons per day, and they have done it using slightly less total energy, according to Jaime Ramirez Barajas, vice president and process control systems specialist at Mexico-based Cemex Technology. How have these kilns and their plants achieved these gains? You guessed it. They continually improved their controls and automation equipment and architectures.

Jaime Ramirez Barajas
“We’re moving to integrated control architectures that are good at regulatory and sequential control, meet all technical requirements, but do so at a lower cost of ownership.” Cemex’s Jaime Ramirez Barajas explained the multinational cement-maker’s rationale in moving to Rockwell Automation’s Logix architecture.

Ramirez presented “Evolution and Benefits of Cement Plants’ Automation and Control Systems Technology” at the Mining, Materials and Cement Industry Forum on the opening day of Rockwell Automation's Automation Fair 2008 this week in Nashville, Tenn.

Over the past four decades, Cemex’s plants migrated from relays, pneumatic, analog, PLCs and distributed control systems to increasingly hybridized, intelligent and now integrated and even wireless controls.

“The typical distribution of I/O signals in a cement plant is about 85% digital, 13% analog and 2% PID controllers. Process control, quality control and machinery-condition monitoring depend on analog variables and regulatory controls,” said Ramirez. “Also, the three control system architectures in cement plants are DCS, hybrid DCS and PLC, and PLC integrated with PCs. Hybrid DCS and PLC systems are good for regulatory and sequential control, but they’re costly to maintain and their operators need a lot of training, Ramirez said.

“The most recent move has been to integrated control architectures that are good at regulatory and sequential control, meet all the users’ technical requirements, but do it at a lower cost of ownership,” Ramirez said. To ease the pain of this evolution and better guide its migration, the company’s staff spent seven days developing their Cemex Strategic Automation Plan (CSAP). Consequently, when selecting a new control system, Ramirez reported that Cemex now routinely considers several issues. These include operational safety and reliability; production quality; enabling one operator to control the plant; programming that ensures easy maintainability; continuous operation at the lowest possible cost; easy integration with other Cemex information systems; server, data, communications and controls redundancy; simple online system changes; and a good migration path.

“Our recommendation for automation projects is to use integrated systems,” added Ramirez. “This means using one non-proprietary computer hardware platform, which reduces total investment, spare parts, needs and total cost of ownership over time. It also means using one common software platform, which facilitates systems design, programming, maintenance and documentation. An integrated control system is the best option for today and in the future, and ControlLogix is the most flexible automation system we found in the market today because it lets us use leading-edge control technology at lower cost.”

In addition, Ramirez said that Cemex’s basic design directives for its integrated controls require that they must have independent process controllers for each process area to avoid propagating any failures; redundant process controllers in the kiln only. They must also centralize PLCs’ CPUs in the central control room; use best-in-class PLCs and HMI components; use Ethernet as the backbone for client-server-controller communications; introduce smart motor control center (MCC) technology to minimize process downtime; reduce troubleshooting and mean time to repair (MTTR); and enable management and reporting of plant equipment status, operation parameters and alarming of process and equipment operation to upper-level systems.

Intelligent MCCs need fewer physical I/O signals and offer more diagnostic and monitoring features. “Using intelligent MCCs saved us 17.7% compared to using conventional MCC technology,” he said.

By implementing these advances and integrated controls, Ramirez reports that Cemex has greatly improved its operations and efficiency in recent years. For example, shutdown diagnostic time dropped from more than 30 minutes in the 1990s to less than one minute now. Formerly required backup/redundancy functions can now be optional. The firm’s once-proprietary hardware and software platforms are now open, and it uses smart field instrumentation and networking. “All of this further reduced the cost of our implementation engineering, maintenance and updates,” reported Ramirez.  

Finally, Cemex also has implemented several advanced process control (APC) capabilities, including model-predictive controls and neural networks from Pavilion. “The real benefit of applying APC is standardizing our operation criteria, freeing up operators from routine activities, increasing our operating consistency and stability and quality,” said Ramirez. “For example, Pavilion’s APC helped us reduce standard deviation in product quality at mills for two different cement types by 33% and 23.8%, and cut production deviation by 16.7% and 21.4% at the same time.”

Share Print Reprints Permissions

What are your comments?

Join the discussion today. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments