The Project Staff at Celulosa Arauco

Environment, Safety, and Quality Goals Realized in Unusually Successful Start-Up

Share Print Related RSS
Page 2 of 3 1 | 2 | 3 View on one page

Emerson supplied the Smart Mill infrastructure built around its PlantWeb digital architecture and FOUNDATION fieldbus networking. The solution integrates 3300 FOUNDATION fieldbus devices including flow, level, pressure and temperature instruments, valves, and with digital valve controllers. Predictive diagnostics information is collected from intelligent devices throughout the mill by predictive maintenance software which delivers alarms and data to operations and maintenance personnel.

In this completely integrated mill, the architecture and its digital system control more than 2100 Rockwell E3 and E3+ motor control centers (MCCs) through DeviceNet, more than 3500 discrete remote I/O points through Profibus DP, and more than 340 variable speed drives though Profibus DP. The DeltaV system also interfaces with more than 15 programmable logic controllers (PLCs) through Profibus DP and special analyzers through Modbus. Emerson also provided FOUNDATION fieldbus consulting, standard definitions, and automatic database generation and other services.

 

pulp mill installation of FOUNDATION Fieldbus
World’s largest pulp mill installation of FOUNDATION Fieldbus

A Microsoft Access application was developed to provide output for configuring the digital automation system directly through an ODBC connection. Information on all system I/O interface cards, FOUNDATION fieldbus cards and devices, Profibus devices, DeviceNet devices, and single I/O channels was captured in the application. Indexing and integrity checking was performed to detect possible errors and loss of data.

A simple form provided the ability to assign I/O interface cards according to availability of their respective carrier slots. Once the I/O slots were loaded, the form was used to allocate FOUNDATION Fieldbus, Profibus or DeviceNet segments to available interface ports. A subform showed the list of devices attached to any selected segment. With all the buses assigned to corresponding I/O card ports, the final step was to create tables for bulk export to the DeltaV digital automation system.

The application provided the option to select which type of objects to import into each particular process. Special reports were created for hardware integration and system configuration. Other reports with more detailed information such as physical location for each signal in control cabinets, device settings, instrument ranges, alarms, etc. were used for software configuration.

 

digital system
The digital system integrated all I/O, including FOUNDATION fieldbus, Profibus, and DeviceNet devices.

This automated approach to the database generation greatly reduced the amount of time required for configuration, resulted in an error-free database population and provided a source of information that was re-used for documentation and training, simulation, and test sheets.

Digital technology speeds configuration and startup

“A very good example of the benefits of digital bus technology is provided by the intelligent motor control configuration,” Erazo said. “In previous projects where we had no intelligent motor controls, configuration of a complete Motor Control Center for 30 motors could take two weeks to one month. Now it takes just half a day to do the same job.

Configuring a valve is also much faster than before. On previous projects, we could spend up to half a day trying to get a valve to move to the chosen setpoint as part of the calibration process. Today all we have to do is press a button and it self-calibrates. If a problem ever occurs with the valve we can get the diagnosis immediately. By using FOUNDATION Fieldbus and the diagnostic capabilities of the predictive maintenance software, we can quickly determine whether the problem is with the actuator or the transmitter, or if it's only a calibration problem.”

“A key advantage of the predictive maintenance software is the amount of information it provides,” said Juan Jorge Cáceres, Maintenance Manager. “It tells us the state of calibration and if there is a malfunction, such as an actuator problem in a valve, so that we can fix it before it forces us to shut down parts of the plant. The advanced diagnostics of also help us prevent damage to the environment and increase the utilization of the plant.”

Erazo added: “Digital bus technology makes it possible to do our diagnostic and often our repair work from the main control areas rather than on the ground. Wireless networks enable our technicians to go all over the plant with their laptops, testing equipment much faster than in the past. We had practically no errors in the digital automation system and we started up the plant successfully and quickly. The wide use of technology made configuration of the plant easier.”

To further ensure smooth startup, Emerson performed off-line testing using complete high fidelity simulation with the system to validate operations and configuration, and to familiarize operators.

We checked all the logics programmed in the digital system for the different areas, area by area, together with the vendor of the associated machine,” said Erazo.  “We did it by simulating the real process in the plant, so that we could be 100% certain that the logic was good and we wouldn’t have any problems during start-up.

In addition to simulator training, operators found consoles easy and intuitive.  “I didn’t take a training class on how to operate with the system but it turned out not be necessary,” commented Marcos Vidal, Superintendent in the mill’s liquor area.  “That’s because the system is very easy to operate.  It’s very similar to Windows. Built-in diagnostics make it easy to detect and determine the cause of problems 

Page 2 of 3 1 | 2 | 3 View on one page
Share Print Reprints Permissions

What are your comments?

Join the discussion today. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments