2009 Salary Survey

High Anxiety; Not Much Change. The Numbers In Our Survey Have Changed Little in the Last Year; the One Thing on the Rise Is the Anxiety Level, Making the Process Industries Typical of Manufacturing in General

2 of 2 1 | 2 > View on one page

However, buried in these seemingly nearly static benefit numbers is one of the sources of discontent. A Michigan-based plant maintenance technician reports, "The company just got rid of its pension plan and announced no raises this year, except medical costs went up." 

An Indiana-based mechanical engineer in plant operations and maintenance for a plastics plant added, "Employee contributions for medical benefits keeps eating up any raise that is received. Deductibles for medical are very high and result in another $200-$300 dollars a month in expenses to cover the deductibles and out-of-pocket costs. The net effect seems to be a reduction in the overall compensation."

"We are seeing a decrease in our benefit package. Larger medical insurance contributions by staff, larger co-pays and decline in coverage," adds a water and wastewater operations technician from Michigan.

In short, says a plant maintenance engineer with more than 20 years experience in the plastics and chemical industries, "Salary is not keeping pace with benefit decreases."

Perhaps here is the place to note that, despite good wages and benefits (well, maybe not as good as they were, but still better than in many other industries), most engineers aren't in it for the money. Nearly 44% said the most important contributor to their job satisfaction was having challenging work, compared to 16% who said it was the salary and benefits, a number that comes in third after "appreciation" at 17%. Another 14% say the most important thing to them is job security (Figure 4).

High Anxiety

Yet job security is the source of a lot of the anxiety, frustration and anger in our survey. The current economic situation leaves our respondents more than a little nervous about their jobs—and who can blame them?
Fifty-two percent of those we surveyed said they were concerned about job security, which is not a bad number, considering the current state of the economy, but down significantly from the 58% who said they weren't concerned last year. This drop is one of the deepest in all the categories in the survey.

Interestingly, the number of people saying their companies are hiring or conducting layoffs is almost equal—38.2% and 37.9%, respectively. Nearly 25% say that raises and promotions were affected by the economy, up from 19.4% last year (Figure 5).


Figure 5
Figure 5. Companies hiring and laying off are just about even.


However, those nearly even hiring/layoff numbers don't mean that our survey respondents aren't worried about their jobs. Says a Texas-based technology department manager, "The current operational atmosphere is similar to living in a downstairs apartment: You're always waiting for the next shoe to fall."

Mike Dionne, design manager with Integrity Integration Resources, Plano, Texas. says, "The market has really slowed down compared to the past several years. We are holding our own with just enough work to keep busy," 
A Virginia-based engineer with a master's degree in chemical engineering and 20+ years' experience in the chemical industry adds, "Lack of job security is still a threat. Salary increases are falling below inflation."

For David Calo, chief engineer for a large New Jersey-based food processing operation, the outlook is bleak. "Most likely to be outsourced this year," he predicts. (Control checked back with Calo, who reported that his prediction had been correct. The outside company hired members of his department to fill positions, but also reorganized it and eliminated some jobs.)

For the employee of an independent engineering firm in Ohio with more than 30 years experience, the situation is even bleaker. "Presently on temporary unpaid furlough, although I am provided with benefits," he reports.

And, of course, for those left behind, there is the inevitable doubling up of responsibilities and some unintended consequences. As a Virginia-based mechanical engineer working in plant maintenance for a chemical company explains, "The current demand for experienced engineers has kept layoffs in check, but the do-more-with-less philosophy due to the current economic situation is affecting quality."

The Outsourcing Villain

With all this job anxiety at home, the subject of outsourcing, always something of a sore point with our respondents, remains one, although the outsourcing numbers have not shifted significantly from last year in spite of the economic downturn. Nearly 68% of those surveyed said their companies outsourced professional or engineering services, down only about 1% from last year. Forty-eight percent of those surveyed said their companies' outsourcing levels were about the same as last year. Nearly 32% said their companies were doing less outsourcing and only 20% said they were doing more (Figure 6).


Figure 6
Figure 6. About the same number of companies overall are outsourcing, but the number doing more than last year has dropped 12%.


But again, the static numbers don't reflect that fact that the subject hits a nerve with our respondents. Jeffrey Bartman, a systems engineer with Proconex, Royersford, Pa., a control products and services distributor, puts a finger on the fear running through the comments. "Engineering is becoming a victim of outsourcing to India and China," he says.

A Missouri-based electrical engineer working for a chemical company amplifies the grievance. "Not only have we been offshoring our engineering work to India, we have been bringing resources into the United States on 18-month visas to perform the work here. My company says this is because we cannot hire enough qualified people. The real problem is that they are not willing to spend the effort and money to train them."

A quality control engineer for a pharmaceutical company in Maryland adds, "Whenever I hear a ‘suit' say, ‘Our employees are our greatest asset,' what I hear is ‘These damn employees are obviously our greatest liability (drain on profits), and let's see if we can do it cheaper in China, India, Pakistan.'"

So, is every thing in process automation horrible? Are people hanging on to their jobs only because there's nothing better on offer? Well, that may be the case with some, but in spite of the very real angst among our survey community, only one person said he doubted he would recommend that his children follow in his steps on the process automation career path.

The praise may be a bit more muted than in times past, but some, such as production control specialist Bill Dunmead of food distributor Novamex, El Paso, Texas, still says, "I am happy where I work." 

Brent Beebe, operations manager at meat processor Agriprocessors, Postville, Iowa, chimes in: "This is a good place to work."

Dennis Christiansen, a senior sales engineer at United Electric Supply, New Castle, Del., says, "My workplace and the people I work with and for are very good and have been for most of my career," although he qualified that by adding, "The recent layoffs were hard to accept, but necessary. This is going to be a tough market for awhile, at least well into next year." 

In spite of all the anxiety and genuine anger over the real or perceived current state of affairs, some folks find process automation a good place to be—or think it will be again once the economy straightens out. 

Nancy Bartels is Control's managing editor.

2 of 2 1 | 2 > View on one page
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.


No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments