Top 50 Automation Companies of 2008

The 50 Largest Automation Companies Around the World Keep On Keepin' On Despite the Recession

2 of 2 1 | 2 > View on one page

Leonard did say that he believes that manufacturing is not only not dead in North America, but that it's actually growing, as he shows in the chart on page 26. Manufacturing is actually tracking the GDP, and has shown a signficant increase since 2002. Of course the last part of the chart shows GDP and manufacturing dropping precipitously, but as you can see from the chart on the next page, Leonard believes this drop to be both painful and temporary.

See the Top 50 NORTH American Automation Vendors

Inside the Numbers

What the numbers may not show immediately is the impact of acquisitions outside the traditional "automation" space, namely the continued snatching up of small-to-medium size system integrators that fill specific gaps in industry expertise or regional expertise, such as the acquisition of Ber Mac by ABB, Rutter Hinz by Rockwell Automation, and The Automation Group by Emerson. Many of the numbers here mask the effect that the global recession had on what was otherwise a great year on the fourth quarter results. Up until the fourth quarter, 2008 was shaping up to be a great year just like 2007. The downturn in Q4 2008 was sudden and in many cases violent. The numbers also do not show the large transition that is going on related to system migration and modernization, as competitors continue to go after each other's installed base amid a rapidly aging base of automation systems that must be replaced. 

Internationally, the former design institutes of China are being spun off into independent system integrators. The transition to private enterprise is agreeing with many of these companies, but not so much for others. Rockwell Automation acquired one of these companies, called Xian Hengsheng, at the end of 2008, for example. 

Leonard says, "U.S. manufacturing remains an "engine for growth in the global economy." Productivity and wages have consistently outpaced the rates of other U.S. industries, as well as foreign manufacturers. Manufacturing productivity has more than doubled in the last two decades, almost twice the growth for the overall economy.

"This is a boom for our competitiveness and the general prosperity of the economy," Leonard said. "Contrary to popular belief, the U.S. economy is not de-industrializing."

According to Leonard, this is a good thing for the automation companies and for automation workers in general.  Leonard adds the "actionable items" manufacturers need to focus on include capital-intensive automation improvements, and to start to reach out to emerging markets where capital-intensive investments are growing. While he expects the overall economic recovery to be "tepid," Leonard forecasted that the manufacturing sector over the next two years will grow "quite a bit faster" than the economy as whole. This should translate as faster growth for the automation industry than the manufacturing industry itself, and thus faster than the economy as a whole.

Winners, Losers and Why

Overall, winners will be determined by their strength in the services business, both project services and, more importantly, after-sales services. The companies that will weather the recession the best are the ones with the strongest emphasis on services. Take the DCS market, which is over 50% services already. Services are renewable business, and they are directly tied to plant performance and the labor crisis that is affecting so many end users today.

Consequently, what is going to happen when the economy comes back full steam and end users find they need to add capacity? They are not going to have the human resources necessary to meet demand, and they will increasingly turn to automation suppliers to provide them with outsourced maintenance services, training services and other plant-performance-related services. 

Companies that provide a value-added service will have greater success as the recovery improves than companies who just provide a product. Years ago, the argument among automation marketers was how to "productize" services and software. In the years ahead, the argument will be how to "service-ize" products, so they do not become commodities.

Something else that will happen in the near term is that offshoring in the classic sense of closing factories in North America and Western Europe to open them up again in Asia is becoming a thing of the past. Companies are beginning to realize that engineering, R&D and manufacturing of very complex products are sometimes done better in the First World, and that offshoring is sometimes false economy. What will happen is that plants will be located close to markets, and since the U. S. and North America are still the world's largest market, they will be located here. It appears that GE's Jeffrey Immelt's idea that the U. S. economy requires about 20% manufacturing is taking root and being listened to by CEOs and analysts. Commodities will continue to be made in the cheapest location possible, but many automation products are not commodities.

Some of the things that always accompany recessions are layoffs and restructuring. Automation companies removed all the fat from their employee base long ago. Every automation company has let go personnel in 2009, and not all of them were, in a word, turkeys. In every recession, many of these quality personnel who have been furloughed come back into the market as entrepreneurs with a new product or service that they were unable to produce "back at the farm." This trend will continue throughout the 2010-2012 recovery time frame. If you are an automation professional with a good idea, it may be that now is the time to take a flyer and see if the marketplace agrees with you. 

2 of 2 1 | 2 > View on one page
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.


No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments