Using HART for Asset Management

WirelessHART Extends HART 7 Capabilities for Automation Asset Management

Share Print Related RSS

WirelessHART has two big money plays. First, the one that will likely pay off the fastest, is the ability to add, simply and inexpensively, many more sensors than plants use currently in order to keep up with new regulations and tighter control requirements. And once the wireless mesh network is installed and paid for, adding additional measurement to the network becomes extremely cost-effective. This in itself is an excellent way to make sure that there is enough real-time data to ensure the success of advanced process control systems and complement the soft sensors some plant optimization systems can employ.

The second big money play for WirelessHART is asset management.

Asset management starts with the measurement assets in the field. Thirty million HART-enabled devices are already installed, and the vast majority of them are connected to control systems that aren't equipped to receive the HART Communication digital signal. In addition, there are thousands of pieces of rotating machinery (pumps, motors, fans, etc.) from which it has been problematic to get even rudimentary data like temperature, pressure and vibration—because they are turning. So WirelessHART will permit more than just "instrument" maintenance in the asset management system. It will permit many other, non-traditional measurements to be input directly into the asset management system.

Current asset management solutions require that operators and technicians equipped with mobile data devices do rounds—an exceptionally expensive use of human resources. Equipping position sensors, low- and high-alarm switches, vibration, pressure and temperature sensors on rotating machinery with WirelessHART communication will allow operators to spend their time doing more high-value work than being a "clipboard jockey."

Making It All Work

It is all about interoperability. The insistence of the HART Communication Foundation on interoperability, which Ed Ladd, director of technology programs for the Foundation,  defines as, "Freedom to use any manufacturer of HART devices, and mix manufacturers and products in the same network," has been critical to the HART protocol becoming ubiquitous—with more than twice the number of installed HART-enabled field devices than the next nearest competing fieldbus.

Ladd continues, "Controllers use the same universal commands to communicate with all devices, and there are standardized diagnostics in every device. The same tools work with wired and wireless devices independent of the manufacturer with a goal of one EDD per device to work on all EDD-enabled hosts.  Users have the freedom to use any revision—of the Protocol, of the device—without mandatory upgrades to tools or applications."

Because WirelessHART is HART, applications like the MACTek Bullet application at Progress Energy described in the previous article, where multidrop wired HART and WirelessHART are combined to provide the solution to the test department's issues with obsolete devices, just work. There's no finagling and no special or custom interfaces because it is all HART and that means interoperability.

Gerrit Lohmann, Pepperl+Fuchs' wireless product manager, says it well. "As the pressure continues to grow to optimize in a cost-effective manner, the stranded HART data contained in legacy instruments will be extracted via the customer's existing hardware, through a HART multiplexer or by the latest WirelessHART solution."

Ira Sharp, product marketing lead for wireless for Phoenix Contact, agrees. "This extra information can be used for predicative maintenance and more effective scheduling of maintenance, and provide a more accurate record of the devices being used in the field and their age for asset management."

Emerson's vice president of wireless, Bob Karschnia, points out, "What's key is understanding who will use the stranded data and what they will do with it. A THUM adapter enables the right information to easily get to the right people at the right time. This information might not have been important to the control scheme, but it is likely to have high value to others. Wireless unlocks this information in a cost-effective manner without complicating the control system."

"Remote wireless access to the HART devices allows engineers and technicians to remotely configure devices from a central location," says ABB's product manager for asset management and wireless, Eric Olson. "Beyond making the configuration task more convenient, it also saves time and reduces potential wiring mishaps by not having to use a field handheld to make the configuration changes."

This is a clear improvement for maintenance and asset management, he says, because, "It also allows for better documentation as the device configuration can be saved, printed, and if a device needs replacement, the configuration can be restored quickly. Many devices support a simulate function that can be initiated remotely via wireless to verify the device installation and system connection from a single location. This saves time as technicians no longer need to roam the plant to perform these tasks. And, of course, all of the wireless devices can be monitored remotely to verify their operation."

Because of the demand for increasing plant and unit optimization, most large vendors of control systems have released asset management software that integrates with the control system software they sell. The integrated and interoperable diagnostics in every HART-enabled field device are critical to economical asset management. It simply isn't economically possible to send operators and technicians out with handheld devices to download diagnostics from devices—and make sure that the data is correct. With HART it is easy, and with WirelessHART it is easy to do for any installed HART-enabled field device, from pressure transmitters to valve actuators to process analyzers. The elimination of operators making rounds to record process measurements manually not only improves process operations, but also saves time and increases operator safety!

Eric Olson says, "So what are the benefits of plant asset management? Wil Chin, ARC research director, has reported typical results from oil and gas and the chemical industries. He says that in all areas, there are real tangible savings to using asset management, and it is clear that WirelessHART adapters can expand on this by increasing the number of devices available in an existing facility for monitoring purposes."

With this kind of savings potential, process industry companies are going to be focusing on the advantages that HART and WirelessHART are able to give them. Some vendors and knowledgeable end users estimate that as many as 30% of the existing installed wired HART devices will have WirelessHART adapters fairly quickly, while others will wait for shutdowns and turnarounds to install HART multiplexers. That 30% works out to approximately 10 million devices. WirelessHART has a huge potential for improving operational efficiency in process plants worldwide.

End Users Win

Because every process plant in the world has HART-enabled field devices, it makes sense to concentrate on leveraging the assets the plant already has. The interchangeability and interoperability of HART-enabled devices, whether wired or wireless, means that a decision on "what technology to use" becomes "how best do we use the technology that we already have?"

Integrating information from HART field devices into control, monitoring and asset management applications using wired HART, WirelessHART or a combination, is the most effective way to optimize and manage your measurement assets. 


TURN YOUR PC OR PDA INTO A HART COMMUNICATOR!

HART CommunicatorProComSol, Ltd designs and manufactures both the hardware and software needed to perform complete HART device configuration and monitoring using your PC or PDA.  DevCom2000 software uses the registered DDs from the HART Foundation, allowing full access to all device parameters, including Methods.  The latest revision supports HART 7 and WirelessHART.  Reliable, cost-effective USB modems and convenient, wireless Bluetooth modems provide the interface between HART instruments and configuration & monitoring software.  Order these items using our secure website.
www.procomsol.com

 

 

 

 

Wireless HART Development Kit

HART Development KitAdd WirelessHART to your product line quickly and inexpensively with the Nivis WirelessHART Development kit. The kit includes all the tools necessary to build and support a WirelessHART development/testing network, including a router, four sensor radios, network provisioning tool, our network management software and development support from our experts. With Nivis as your partner you can add WirelessHART to your product line with minimal effort.
www.nivis.com
678.202.6800

Share Print Reprints Permissions

What are your comments?

You cannot post comments until you have logged in. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments