The Pressure's On

Products for All Your Pressure Measurement and Control Needs

Share Print Related RSS
Brooks Instruments  ULTRA-HIGH-PURITY PRESSURE TRANSDUCERS
SS2 pressure transducers are designed for stable, accurate and reliable pressure monitoring in ultra-high purity applications. The ultra-stable, micro-machined silicon strain gauges are matched and fused at high temperature to the metal diaphragm to relieve manufacturing-induced stress. The SS2’s mechanical design eliminates torque effects during installation.
Brooks Instrument 
888/554-FLOW
www.brooksinstrument.com
 Turck

PRESSURE SENSORS FOR HYDRAULIC APPLICATIONS
PS300 series pressure sensors for hydraulic applications feature a rugged, IP69K-rated design. They provide a wide measuring range, from 3 to 400 bar. Signals are directly processed on the PS300’s newly developed pressure measuring cell, and digitally transferred to the sensor’s fully potted, self-contained display. They are available in male or female, 1/4-in. NPT, or G 1/4-in. thread versions.
Turck  
www.turck.us

 Ametek

HANDHELD PRESSURE CALIBRATORS
The new Jofra HPC550/HPC552Ex family of handheld pressure calibrators offer deadweight accuracy. They are rated intrinsically safe for potentially hazardous locations. Each device has 16 pressure ranges from 25 mbar (0.35psi) to 700 bar (10,000 psi) with F.S. absolute, differential and gauge sensors, Each is also accurate to ±0.025% of reading at 0.01% F.S.
Ametek Calibration Instruments  
800/527-9999
www.ametekcalibration.com

 UE online

SMART PRESSURE TRANSMITTER
TX200H is a HART smart pressure transmitter that uses the HART 7 specification, and has a flexible 10:1 turndown on pressure ranges from 0 to 15 psi (0 to 1 bar) up to 0 to 25,000 psi (0 to 1724 bar). It meets enclosure type 4X and IP66 requirements, and is certified for cULus for Class 1, Div. 1 & 2, Zone 1 and ATEX Ex d and Ex tD hazardous areas and is CE-compliant.
United Electric Controls 
617/926-1000
www.ueonline.com

 ABB

ELECTRONIC PRESSURE TRANSMITTER
The Model 266 series electronic pressure transmitter offers a base accuracy from ±0.025% to ±0.06% and a draft range providing a minimum span of 0.2 in. H2O with a 4 in. H2O upper range limit. It also has through-the-glass technology that provides configuration without opening the cover, even in hazardous areas, and plugged-impulse line detection on HART and Foundation fieldbus.
ABB
215/674-6480
www.abb.com/instrumentation

 Yokogawa

HIGH-PERFORMANCE, DIRECT-MOUNT PRESSURE TRANSMITTERS
The EJX610A high-performance absolute pressure transmitter and the EJX630A high-performance gauge pressure transmitter are available for delivery now. They feature ±0.04% of span accuracy (optional ±0.025% of span on the EJA630A), measurement spans of up to 10,150 psi, long-term stability of 0.1% of URL for 10 years (EJX630A) and 200:1 rangeability.
Yokogawa  
800/888-6400
www.yokogawa.com/us

 Endress+Hauser

HAZARDOUS-AREA PRESSURE TRANSMITTERS
The M Class Deltabar M PMD55 transmitter and its Cerabar line of pressure transmitters have ATEX, FM, CSA, NEPSI and IEC Ex certifications. The Deltabar M PMD55 differential pressure transmitter can be used for flow measurement of gases, vapors and liquids. It works over measuring ranges of 0.15 to 600 psi with a maximum recommended turndown of 100:1.
Endress+Hauser
888/ENDRESS
www.us.endress.com

 Meriam

EASY FIELD CALIBRATION/DATA LOGGING
The M4 Series handheld precision calibrator/data logger includes one pressure sensor and one mA/V instrument. Choose from differential, gauge, compound or absolute pressure types, and ranges from 10-in. H2O to 3000 PSIG full scale. Accuracy is ±0.025% of reading from 10% to 100% of range, and ±0.002% of full scale below 10% of range. Accuracy is -20 ºC to +50 ºC (-4 ºF to +122 ºF). 
Meriam Process Technologies
www.meriam.com

 Omega DIGITAL PRESSURE GAGES
The DPG409 series of high-accuracy digital pressure gages features a large backlit display that’s readable from over 10.7 m (35 ft). The stainless steel enclosure is designed for sanitary, wash-down and marine applications. Ranges from vacuum to 5000 psi are available, and all units included set-up software that allows fast installation and calibration via a USB connection.
Omega Engineering  
203/359-1660
www.omega.com
 Keller America

GUARANTEED PRESSURE TRANSMITTERS
Keller America helps users survive the weather and the economy with pressure transmitters featuring guaranteed lightning protection at no additional cost. This feature protects transmitters from voltage surges and provides a lifetime warranty against electrical damage. Keller offers a wide variety of instruments designed to provide the best price, performance and value.
Keller America 
877-2keller
www.kelleramerica.com

 Swagelok

DOME-LOADED PRESSURE REGULATORS
RHPS series domeloaded pressure regulators permit high flows, and exhibit less droop than spring-loaded designs in controlling the pressure of liquids and gases. Inlet pressures range to 5800 psig (400 bar). Regulated pressures span 1.4 to 29 psig (0.10 to 2.0 bar), 0 to 1000 psig (0 to 70 bar), 0 to 2900 psig (0 to 200 bar), and 0 to 5800 psig (0 to 400 bar). They are available for pipe sizes from ¼-in. to 4-in.
Swagelok
www.swagelok.com

 Emerson

REMOTE PRESSURE SENSOR
The Rosemount 3051S electronic remote sensor system is a two-wire, 4-20 mA HART technology that calculates differential pressure (DP) electronically using two pressure sensors that are linked together electronically with a non-proprietary electrical wire. Ideal applications include tall vessels, distillation towers and other installations that require excessive lengths of impulse piping or capillary.  
Emerson Process Management
800/999/9307
www.emersonprocess.com/rosemount

 Orange Research MINI DP TRANSMITTERS
These new miniature differential pressure transmitters are low-cost choices for many applications. Both models offer current or voltage output rated at 4-20 mA or 0-5 V and accuracy of 10% (5% repeatability). Model 1002 has a DP range of 0-4 to 0-75 psid and a maximum line pressure rating of 3000 psig. Model 1020 has a DP range of 0-25” water to 0-10 psid and a maximum line pressure rating of 1000 psig.
Orange Research 
800/989-5657
www.orangeresearch.com
 Teltru

SILICON GLASS-FUSED PRESSURE TRANSMITTERS
P611 and P621 pressure transmitters feature a single-piece, 316L stainless steel sensing element with a high-output, silicon glass-fused strain gauge, coupled with a thick diaphragm to maximize cycle life even in the presence of pressure spikes, vibration and aggressive fluid media. The 316L sensor is welded to a 316 stainless steel body and has no O-rings or seals for leak-proof reliability.
Tel-Tru Manufacturing 
800/232-5335
www.teltru.com

 E Instruments

PROCESS PRESSURE CALIBRATOR
P100 gauge and handheld pumps offer pressure calibration in an easy-to-use design with ranges up to 600 PSI (40 Bar). They combine pressure generation into one unit that is able to display engineering units in bar, mpa, kpa, psi and mbar. The P100 offers accuracy to ±0.20% of full scale or ±0.05% of full scale and pneumatic ranges from vacuum up to 40 bar.
E Instruments International 
215-750-1212
www.E-Inst.com

 Pressure Systems

PRECISION LEVEL TRANSDUCER
TruBlue 575 Baro transducer measures and logs barometric pressure and temperature with extreme accuracy. The new absolute, non-submersible 575 Baro has an 8 MB internal memory and stores up to 550,000 data points. Its internal 3.6 V lithium battery has a lifespan of five years, making it ideal for groundwater and surface water data collection and monitoring applications.
Pressure Systems 
800/328-3665
http://trubluemonitor.com

 APG Sensors

DIGITAL PRESSURE GAUGE
The IP65-rated indoor/outdoor PG10 digital pressure gauge features a 5.5-in. display casing, full five-digit display, and a 270° digital “dial” or radial bar graph that shows a user-selectable pressure range from 0 to 100%. It has four large set-up buttons and has at-a-glance readability. Standard features include tare, peak hold, max-min readings and user-selectable units of measure. 
Automation Products Group
888/525-7300
www.apgsensors.com.

 WIKA

INTRINSICALLY SAFE PRESSURE TRANSMITTERS
The IS-20 series of intrinsically safe pressure transmitters is designed for industrial applications in hazardous areas. It has multiple intrinsically safe approvals including ATEX, FM and CSA. It features an all-welded measuring cell for improved media compatibility. It includes transmitters with flush diaphragms and integral junction boxes. Suitable for oil and gas and chemical and food industries.
WIKA 
678/739-2571
www.wika.com

 

Share Print Reprints Permissions

What are your comments?

You cannot post comments until you have logged in. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments