Interested in linking to "Valve Actuators and Positioners Go Digital"?
You may use the Headline, Deck, Byline and URL of this article on your Web site. To link to this article, select and copy the HTML code below and paste it on your own Web site.
With analog outputs, each valve requires a 4-20 mA output from the main control system, with corresponding output wiring from the control system to the valve's 3-15 psi I/P converter.
"Up to 16 I/P converters can be ganged together in a single manifold, with one fieldbus cable and digital signal controlling operation of each," says Frank Latino, the product manager for valve terminals & electronics at Festo Corporation.
"Digital data is easier to use than analog, since it's no longer necessary to convert a 4-20 mA signal. One can instead send a digital signal representing 12.3 psi or 745 mbar, for example. Each I/P has internal closed-loop control, so setpoint pressure is locally maintained with accuracy under 0.3 psi," he adds.
A digital fieldbus output can be used to drive a valve to its desired position, and a digital positioner can inform the control system if that position has been attained. "Our digital positioners feature high accuracy because of the use of embedded sensors for valve position and air pressure measurement," notes Niklas Lindfors, product manager for Neles smart products at Metso Automation.
"Smart positioners enable users to push the limits of control valve performance, reducing raw material consumption and improving end product quality. A unique second generation of diagnostics allows the collection and analysis of the control valve assembly's performance while the process plant is running, and also stores information in the positioner memory for analysis," he continues.
“Innovations have added and enhanced several internal variables within the positioner to form multiple closed loops for local control within valves.”- Scott Wilkerson
"The next generation of valve diagnostics enabled by device type manager (DTM) technology delivers refined diagnostics information in a user-friendly manner. A performance view includes a graphical index on overall valve control performance—and also on valve, actuator, positioner and environmental factors. Pressure information, as well as deviation between the setpoint and actual position of the valve, is also shown graphically," concludes Lindfors.
When the actuator and the positioner are digital, then closed-loop digital control becomes feasible. "Recent innovations have added and enhanced several internal variables within the positioner, such as speed, position and pressure, to form multiple closed-loops for local control within valves," explains Scott Wilkerson, the senior product portfolio manager for host integration at Flowserve.
"Advances in field device tool (FDT) and DTM technologies have provided a standardized communication and user interface between host systems and field devices. DTM software continuously captures rich diagnostic data from the valve, actuator, positioner and control signal while the process is running—and allows displays of these data in an intuitive graphical user interface," notes Wilkerson.
Digital advances have also improved maintenance. "While advanced control valve diagnostic tools have been around for some time, only recently have improvements in mobile handheld devices made it possible to quickly and easily take those advanced tools into the field without requiring a laptop computer," observes Ken Hall, senior manager for Fieldvue integration at the Fisher Controls division of Emerson Process Management.
"These devices enable users to locally set up, calibrate, validate and troubleshoot the control valve assembly. These modern mobile valve maintenance tools make troubleshooting of problem valves quicker, easier and more reliable due to advanced field diagnostics. Easy to perform yotal scans and predefined step studies that validate valve assembly performance increase reliability," adds Hall.