Log In Register

Input/Output: Basic Technology You Need to Run Your Operation

The Editors Take a Look at I/Os and Other Devices That Are Essentials to Your Operations

08/14/2012

1 vote
Text size: - +
in-rail mounted I/O

IN-RAIL-MOUNTED I/O WITH USB PORTS
The TT230 series of signal conditioning I/O modules are 12.5-mm wide for high-density mounting on DIN-rails and provide a USB connection to a PC for configuration. Models are available to isolate and convert thermocouple, RTD, voltage or current input signals to a 4-20mA output. They are loop-powered and support both source or sink output wiring connections.
Acromag
248/295-0865
www.acromag.com
 modbus network

SIMPLIFY REMOTE SENSOR INSTALLATION
Ion Modbus network nodes simplify remote sensor installation and help save on wiring costs. Directly connecting to PLCs, touchscreens and PCs, they offer high data throughput with less than 1 mS latency. Pluggable terminal blocks for power input, isolated 2-wire RS485 network port, sensor connection and relay outputs make wiring and installation minimal and easy.
Electro-Sensors Inc.
1-800-328-6170
www.electro-sensors.com
 Ethernet Gateway

ETHERNET TO SERIAL GATEWAYS
PLX30 gateways are a cost-effective solution for connecting devices on dissimilar networks. The module is a standalone DIN-rail-mounted protocol gateway that provides one Ethernet port and up to four isolated serial ports. They support multiple I/O connections to EtherNet/IP-enabled PACs, providing real-time transfer of up to 4000 words of data between various devices.
ProSoft Technology
661/716-5100
www.prosoft-technology.com
 marshalling system

THREE-COMPONENT MARSHALLING
This marshalling system features three modular components. First, a range of interface modules designed to reduce cabinet space and provide feed-through connections for 16 channels. The second component includes assembled marshaling cables in several standard lengths including 1.5-meter, 2-meter and 5-meter. The last component is the new WMF terminal block, which accepts a 5.08mm (BLZ) or clamshell connecter.
Weidmuller
800/849/9343
www.weidmuller.com
 Junction boxes

TOUGH JUNCTION BOXES
Turck introduces a new stainless steel version of the company’s junction boxes, designed to provide a robust connectivity solution on corrosive, off-shore platforms. Featuring FM approval for Class 1, Division 2, Groups A, B, C and D hazardous locations and rated IP67, they ensure optimal performance in areas that present harsh environmental conditions such as dust, water and salt spray.
Turck
800/544-7769
www.turck.us
 Etehrnet Based Distributed I/O

ETHERNET/IP-BASED, ON-MACHINE DISTRIBUTED I/O
The new 1732E Slim ArmorBlock digital scheduled output module can schedule an output in 1 microsecond increments, and trigger multiple outputs at intervals of 100 microseconds. This is useful in motion applications where higher resolution of outputs is required. By using CIP Sync distributed time synchronization, it can register any axis position within the system accurately with a single time-stamp.
Rockwell Automation
www.rockwellautomation.com
 Temperature Concentrator System

LOW-COST TEMPERATURE INPUT
Temperature Concentrator System (TCS) reduces the cost of transmitting multiple temperature sensor measurements by concentrating up to 32 signals onto a single twisted-wire pair. It accepts any combination of RTD, T/C, mV and resistance/potentiometer signal inputs, converts them to the HART protocol, and transmits the data on an economical HART digital data link.
Moore Industries International, Inc.
818/894-7111
www.miinet.com
 Wireless I/O WIRELESS I/O
Adam-2000Z I/O modules use IEEE 802.15.4 standard I/O and latest sensor technology, while supporting 2.4-GHz mesh networking to provide flexibility and build a cost-effective distributed monitoring system. The series includes five modules, a Modbus/RTU gateway, router node, I/O and sensor devices. It features low power consumption, ensured data integrity and more.
Advantech Industrial Automation Group
888/576-9668
www.advantech.com/ea
 Distributed I/O DISTRIBUTED I/O
The ST Series is a modular distributed I/O system that operates as a slave device station for either CC-Link or Profibus device-level networks. It features a head unit, power supply and DIN-rail mounting to form a remote system or node. It has a scalable architecture that accepts mix-and-match I/O configurations. Its modular design easily accepts I/O concentrations from two to 16 I/O points.
Mitsubishi Electric Automation
www.MEAU.com
 remote I/O RUGGED REMOTE I/O
The ioLogik E1500 Series is designed to meet both strict EMC standards and operational environmental requirements of wide temperature and shock resistance. It is housed in a ruggedized aluminum enclosure and comes ready to mount with an integrated DIN-rail. Added features include temperature range from -40 °F to +185 °F; and channel-to-channel isolation of all I/O channels.
Moxa
888/MOXA-USA
www.moxa.com
 Terminal Blocks THREE JUMPERS
2002 Series TopJobs terminal blocks carry three jumper slots for greater control cabinet flexibility. New DIN-rail disconnect/test with mechanical interlock, mini-automotive blade-style fuse and fuse disconnect with pivoting holder accommodate one output and two input potential commoning. The third jumper slot permits test and measurement via plugs or taps.
Wago
800/DIN-RAIL
www.wago.us
 Compact I.O COMPACT, LOW-COST I/O
The new eI/O family of Ethernet digital I/O solutions provides system designers with a compact, low-cost alternative for monitoring and control and is perfect for a variety of applications including process control. Five models offer a choice of optically isolated inputs, reed relay outputs and Form C relay outputs. They are available in PoE 802.3af versions. DC-powered models are also available.
Sealevel Systems
864/843-4343
www.sealevel.com
 I/O Modules HIGH-SPEED I/O MODULES
Productivity 3000 includes the P3-HSO high-speed, output module that supports pulse/direction, up/down and quadrature pulse outputs on each of two independent output channels. P3-HSI high-speed input module has both differential- and single-ended inputs, and accepts pulse/direction and quadrature signals on each of the two independent input channels.
Automation Direct
800/633-0405
www.automationdirect.com
 manual control modules MANUAL CONTROL
KL85xx manual operating modules mount on the outside of control cabinet doors using a snap-in system for easy, manual machine intervention without opening the control cabinet and the convenient observation of process data. The modules can be integrated via bus couplers into almost any fieldbus system. The modules are configurable through TwinCAT automation software.
Beckhoff Automation
952/890-0000
www.beckhoffautomation.com
 signal converter CONVERT YOUR SIGNALS SEAMLESSLY
Users of CTC Series signal converters can use a standard, 5-amp secondary CT or low-voltage (0.333 VAC) ProteCT current transformer with non-contact ranges as low as 0-5 A over a conductor to produce a standard 4-20 mA, two-wire, loop-powered signal. With DIN-rail mounting and a 24 Vdc loop-powered supply, CTC series provides simple, snap-in installation that requires no calibration.
NK Technologies
800/959.4014
www.nktechnologies.com
 AS-interface I/O FAST ANALOG TO DIGITAL CONVERSION
Pepperl+Fuchs introduces three new G11 Series AS-interface I/O modules. These Ecolab, clean-design certified modules not only deliver reliable operation, but also help improve productivity by delivering the fastest analog to digital conversion available today. They provide lead break detection and integrated shield connection in the M12 connector and on the base to maximize reliability.Pepperl+Fuchs
330/486-0001
www.pepperl-fuchs.us

 

1 vote

ControlGlobal.com is exclusively dedicated to the global process automation market. We report on developing industry trends, illustrate successful industry applications, and update the basic skills and knowledge base that provide the profession's foundation.

Most Popular Check out the most popular content on ControlDesign.com, as determined by our visitors.

  1. #1Beginner's Guide to Differential Pressure Level Transmitters
  2. #2Killing Model-Based Control Dead Time
  3. #3Automation and Fukushima: Not So Fast
  4. #4Bringing the Lincoln Paper Mill Back from the Dead
  5. #5IEEE 802.11 Evolution Continues