By Terry McMahon, Steve Walton and Jim Tatera
Analytical instruments used for online chemical analysis of process streams or plant environments are generally called process analyzers. On-stream analytical data have proven to be crucial to safe and efficient operation in the petroleum, chemical, pharmaceutical, pulp and paper, power and other industries. Historically speaking, these instruments have been complex, even temperamental, systems with relatively unique operational and maintenance needs. If online instrumentation, sample-handling systems and data-analysis software are to realize optimum performance, they will require continual attention from the analyzer support staff.
Increasingly, however, regulatory and high-priority economic concerns such as operator health and safety, emissions control and energy conservation are raising the importance of analyzer reliability to normal operations. Particularly with respect to regulatory and safety uses, the time logged as out-of-limits because of an analyzer outage can result in stiff fines.
In these situations, it's important to be able to deal with routine maintenance needs, as well as to recognize and characterize maintenance needs that require more specialized skills. Sourcing such specialized skills and an expedited response to an incident frequently become high-priority items.
A brief overview of analyzer history can put the current situation into perspective. The technology for on-stream chemical analysis dates back about 70 years. The first non-dispersive infrared (NDIR) photometers were developed and deployed in the late 1930s at the Ludwigshafen Research Lab of I.G. Farbenindustrie, A schematic of UltraRotAbsorptionSchreiber (URAS), the first on-stream analyzer, is shown in Figure 1. The URAS trade name belongs to the original manufacturer, Hartmann & Braun, which is now a unit of ABB.
U.S. chemical and petroleum companies began using on-stream analyzers in the 1950s. By 1960, Standard Oil of New Jersey's (later Exxon) Baton Rouge Refinery had a significant complement of on-stream analyzers (Table 1).
The emergence of real-time digital computers in the 1960s, followed by the microelectronics revolution and the large-scale integration microprocessor in the 1970s, eventually allowed exploitation of highly sophisticated analytical techniques for on-line analysis. During the past 10 years or so, the full power of on-stream chemical analysis, combined with modern information technology, has taken hold throughout the process industries and is generating higher productivities, yields, efficiencies and product quality.
Realizing these benefits required highly skilled and experienced technical personnel. The analyzer community evolved into a culture suited to the care and tending of these useful industrial analyzer tools. The question facing plant operations management is this: How do you realize the enormous potential benefits of on-stream analysis without the overhead of on-site analyzer specialists?
In the beginning, the computer was a highly specialized tool surrounded by a cadre of expert practitioners. During the late 1950s, mere mortals never were allowed to approach the computational machines. The high priests, who tended the main console, changed magnetic tape drives and otherwise managed the care and feeding of the electronic monster were the only humans allowed to have access to the air-conditioned inner sanctum. These operators accepted your deck of punched cards, and a day later handed you a printout of your results or, more frequently, a memory-dump to help you with your program fault analysis. What happened between your two visits was known only to the Most High.
Ultimately, Microsoft and Intel turned Everyman into a high priest, but with a big difference. Today's user needs to know very little about hardcore programming. The large software producers already have done it. Save for a very few exceptions, computer specialists rely on preprogrammed software tools that come with the operating system.
A Digital Parallel
Analyzers are now at a somewhat similar juncture. Plant operators need the data analyzers provide, but often can't afford to dedicate a highly skilled individual to provide it.
The big questions are these: Are analyzers ready to cut the cord and fly without a lifeline? What steps should plant operations management take to realize the benefits of analyzer-derived data, while ensuring that the data flow maintains a high level of reliability?
Paul Pulicken is in charge of analyzer technology at BP's Texas City Refinery, as well as working with others in this technology at the company's five U.S. refineries. With 23 years of analyzer experience in a variety of petroleum and chemical processes, Pulicken is well-positioned to offer direction in this field. [Editor's note: Pulicken is now head of process analyzer technology at Bayer Americas.]