Prototyping for Small and Large APC Applications

DuPont Uses Simulation and Rapid Prototyping Tools to Select, Justify and Implement Advanced Process Control (APC) in Many More, Smaller Applications

By Jim Montague

Share Print Related RSS
Page 1 of 2 « Prev 1 | 2 View on one page

Low-hanging fruit is fine, but there's a lot on the smaller, upper branches, too.

However, to make the climb, you have to understand that advanced process control (APC) means different things to different people. Before the 1970s, APC typically referred to advanced regulatory control (ARC) which involved feed-forward, ratio, cascade and overrides. During the 1970s, the next generation of APC—model predictive control (MPC)—started to make inroads. Historically, APCs were used to handle production of high-volume, commodity products, and so MPC became the preferred approach to optimize these big-ticket oil and gas, chemical, petrochemicals, refining and other large applications. However, even though MPC still serves its traditional roles, it's also now being considered to help optimize smaller, more specialized processes. Fortunately, just as computers, electronics, software and other devices are enabled by faster, more powerful and cheaper microprocessors, MPCs have been coming down in price lately, too. Unfortunately, it can still be difficult to successfully argue for using MPC in smaller applications, mainly because so many people think it's too costly, and will take too long to be worthwhile.

DuPont (www2.dupont.com) has been using ARC applications and its rigorous modeling and simulations for many years, but lately some DuPont engineers have been using rapid prototyping methods to help choose, implement and gain MPC's benefits in smaller applications where it makes economic or operational sense. To aid these efforts, DuPont is using the recent integration between Aspen Technology Inc.'s (www.aspentech.com) aspenOne APC software and its Hysys dynamic modeling and simulation software to refine and increase its smaller-scale MPC implementations by 450%.

MPC via the Internet

"Basically, this capability facilitates appropriate use of MPC in more applications, which is part of DuPont's best practices and Six Sigma approach," says Phillip "Dave" Schnelle, principal consultant in the Process Dynamic and Controls Group in the Engineering Technology division at DuPont. "Rapid prototyping is part of our application development flow for APC. It allows us to screen APC applications and answer the question 'ARC or MPC?' We run Aspen APC on our central server in Wilmington, Delaware, and hook it up to data sources, such as Aspen's standard InfoPlus.21 (IP21) historian and others at any of our hundreds of plants worldwide via a process data connection. We can mock up and prototype MPC applications connect real process data. Using these predictions, we can then show operations 'this is our plant on your current controls, and this would be your plant on APC.'

"For instance, we can sit in our offices and get information from any facility that has IP21, and then use that data to create a models and controllers. The output HMI for the prototype MPC is a web page. The plant engineers can watch what's going to happen in a particular operating situation by pulling up the Production Control web pages for their application. So, without incurring any expense, they can make better decisions about whether it's a good idea to use MPC for their application."

Traditional approaches to MPC can take weeks and cost thousands of dollars. Creating prototype MPC applications and using them for engineer and operator training can make implementing real application more straightforward and more successful in the long run. "Many potential DuPont MPC applications are relatively small, but they can be very lucrative because of increased push rates or energy savings. However, they can be hard to justify because of their size," explains Schnelle. "Rapid prototyping helps us make the 'go or no go' decision. We can quickly test and train on the concept; transfer ideas to the operators; develop MPC models; and do it all without spending a lot upfront. Once we know a project will succeed, much of the design has already been done, and we have most of the application already to go."

Robert Golightly, Aspen Technology's industry marketing manager for APC, adds that, "The novelty in DuPont's efforts is the process they use to choose and justify APC projects. The tradition is to perform detailed engineering studies as part of the justification process for APC. Part of those studies includes an estimation of expected benefits. These studies are time consuming and very expensive. What DuPont is doing is streamlining the process for evaluating, selecting and prototyping MPC applications to the point that it's economically viable for smaller units.

Prototyping Procedure

Page 1 of 2 « Prev 1 | 2 View on one page
Share Print Reprints Permissions

What are your comments?

You cannot post comments until you have logged in. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments