Level Applications from the Dark Side

Some Level Measurements Are so Hard as to Be Nearly Impossible. Here's What to Do.

By Walt Boyes

Share Print Related RSS
Page 1 of 2 « Prev 1 | 2 View on one page

You'd think that since level is a measurement we've been making since we were still using stone tools, that we'd have figured out how to measure level easily and simply and with high accuracy in every possible application.

Well, we haven't. And there are reasons for this. Mostly, the reasons are that there is no one kind of level, so there are many kinds of level measurement.

Wait! Level is just the top of a liquid or solid or powder in a tank or vessel, right? Not really.

Level measurements span a continuum that runs from "too easy to bother with" all the way to "this is too hard to do" and even to "this is impossible." Where a specific application lands on the continuum depends on how important a measurement it is, how necessary and how difficult technically it is to accomplish.

The right hand side of the chart is where things get really interesting. The chart is based on technical difficulty. That is, how hard it is to acquire an accurate measurement and do it repeatably.

What the chart doesn't show you is whether you should make the measurement or not. That's a decision that is based on several factors.

First, do you absolutely need that level measurement to control your process? If the answer is yes, it doesn't matter how technically difficult it is to make the measurement, you will figure out some way to do it.

If the measurement isn't exactly necessary, but it would be very nice to have it for control or optimization purposes, it comes down to how much it will cost to make the measurement and maintain the instrumentation over time. If the cost is very high, you may decide it isn't worth making the measurement based on the available technology.

In either case, there will be some level measurements that are either absolutely necessary or very nice to have that will be on the extreme left of the chart. At this point you have to decide if an instrumented measurement is necessary, or just having Jack from Maintenance drop by the vessel once a shift and look inside will do. "Yup, the level is fine." That's a measurement, too.

We're going to look at a few examples from the "Dark Side" of the Level Measurement Continuum.

Tickle.

That's what they call it. It is one of the most dangerous industrial chemicals. Its real name is titanium tetrachloride, TiCl4 and it is used to make titanium metal and white pigment. Titanium tetrachloride is a yellowish liquid, but it hydrolyzes into titanium dioxide (TiO2), a thick white goop, and hydrogen chloride gas (HCL g) in the presence of water. By water, I mean water vapor, humidity, the sort of water that can be found in an industrial vessel. Titanium tetrachoride also fumes. The hydrogen chloride quickly becomes hydrochloric acid (HCI).

You would think that the level of tickle in a vessel, being a clear-to-yellowish liquid, should be a relatively easy measurement. But it is not.

If tickle stayed a clear-to-yellowish liquid, the measurement would be simple. Unfortunately, it is not possible to remove all the water in the air inside the vessel, and what water there is, even humidity, quickly hydrolizes the titanium tetrachloride into TiO2 and HCL gas. What water is left quickly turns the HCL into hydrochloric acid. The TiO2 is thick, sticky and ropey. It clings to surfaces and hardens on them. Standpipes fill quickly with TiO2 and become useless. Sight glasses fail almost instantly. The HCL gas and hydrochloric acid corrode the interior of the vessel and make pressure taps unworkable.

Capacitance or RF admittance devices coat up, and even those that are supplied with anti-coating circuitry can have real problems making the level measurement. The same thing is true with time domain reflectometry (TDR) radar devices. Ultrasonic level devices are unreliable because the liquid fumes and the ultrasonic signal can be lost in the vapor or see a thermocline in the vapor space as the level rather than the actual level.

Page 1 of 2 « Prev 1 | 2 View on one page
Share Print Reprints Permissions

What are your comments?

You cannot post comments until you have logged in. Login Here.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments