|ANALYZER FLOW SWITCH/MONITOR
Model FS10A analyzer flow switch/monitor is designed for use with nearly all process and emissions sampling systems, including gas chromatographs, mass spectrometers, optical spectrometers and photo-meters. Standard configurations will accommodate 1/8-, ¼-, 3/8- and ½-inch sampling tubes and an SP76 adapter. It now has FM and FMc approvals.
Fluid Components International
|PORTABLE FLUE GAS ANALYZER
Lancom 4 compact portable flue gas analyzer can monitor up to nine different gases and 17 measurement parameters. It weighs less than 15 pounds, and is housed in a single robust enclosure for use in harsh boiler and stack environments. It supports multiple languages and measures CO (Low), CO (High), O2, CO2, NO2, SO2, H2S and total hydrocarbons.
|EXTREME GAS CHROMATOGRAPHY
The Rosemount Analytical 700XA gas chromatograph provides extended analysis for extreme conditions. With a redesigned enclosure, the 700XA offers efficient use of oven space to accommodate both micro-packed and capillary columns, as many as four 10-port valves, a rotary valve for liquid injections, up to two thermal conductivity detectors and other features.
|TOUCHSCREEN GAS CHROMATOGRAPH
PGC5000 series process gas chromatographs now come with a new touchscreen. The front panel is the standard configuration for the PGC5000A master controller. Upgrade kits are available for all PGC5000As installed in the field. The panel fully integrates into the current design, and provides redundant local user interfaces with the integrated mouse touch pad.
|OPTICAL ABSORPTION SENSOR
OUSAF11 sensor measures optical absorbance by a process fluid. OUSAF11 is ideal for product loss detection, interface detection and suspended solids and turbidity measurements. It’s available in an immersion or an insertion model with Tri-Clamp or Varivent connections that meet 3A sanitary standards. It can run continuously up to 194 ºF (90 ºC), and up to 266 ºF for up to two hours.
|REDUCE TIME DELAY
Swagelok Fast Loop Module (FLM) helps reduce time delay in online analyzer systems. Part of the Swagelok Pre-Engineered Subsystems series, FLM is predesigned and preassembled for off-the-shelf installation into fluid sampling and control systems. It is designed to handle long transport lines from tap to analyzer, while minimizing pressure drop for faster response time.
COLORFUL GAS CHROMATOGRAPH
|COMBUSTION EMISSIONS ANALYZER|
E8500 combustion analyzer includes electrochemical sensors for O2, CO, NO, NO2, SO2 and H2S; NDIR sensors for CO2, CxHy and CO; low NOx- and true NOx-capable; real-time software; wireless remote printer; internal thermoelectric chiller with condensate removal; stack gas and ambient air temperature measurements; and draft and differential pressure measurements.