CG1410-Emerson
CG1410-Emerson
CG1410-Emerson
CG1410-Emerson
CG1410-Emerson

Product Roundup: Process Analyzers

Oct. 21, 2014
These Devices Monitor Everything From Liquid Dairy Products to Combustion in Boilers
ANALYZES DRINKS
LiquiSonic analyzer measurements are accurate to ±0.05% and update every second. When results are outside of a defined production range, the unit immediately sends a signal, so users can take timely countermeasures. For automated control, results can be transferred to the process control system via analog or digital outputs, fieldbuses such as Profibus DP, or Ethernet.
SensoTech  
973-832-4575
www.sensotech.com   
ANALYZER MEASURES FLUE GAS
Rosemount Analytical 6888 in-situ flue gas O2  analyzer includes a “calibration recommended” diagnostic with gas-switching solenoids embedded in the probe electronics. The device eliminates the need for conducting calibrations on a schedule. A “plugged diffuser/filter” diagnostic handles applications that have fly ash or other particulate entrained in the flue gas.
Emerson Process Management  
949-757-8500
www.emersonprocess.com
MULTIPARAMETER TRANSMITTER
Liquiline CM44x multichannel transmitter features EtherNet/IP connectivity, which allows it to seamlessly integrate with Rockwell Automation’s PlantPAx Process Automation System. The transmitter features a built-in web server that lets operators remotely view diagnostic data, perform configuration or access device parameters via any web browser.
Endress+Hauser
888-363-7377
www.us.endress.com
DIGITALLY MEASURE pH/ORP
Sencom liquid analyzer system for measuring pH/ORP consists of a special module, cable and PC software. Installing a module in a special transmitter lets the unit digitally measure pH and ORP. The software lets users calibrate up to four sensors simultaneously and features an integrated database that stores data for up to 100 system sensors to support predictive maintenance.
Yokogawa Corp.
800-888-6400
www.yokogawa.com
FIRE IN THE BOILER
Thermox WDG-V monitors combustion in fired heaters or boilers. It has redundancy and diagnostics to enable predictive and proactive maintenance programs, which helps reduce the risk of uncontrolled combustion events. The analyzer is certified for SIL 2 implementation into safety instrumented systems, and is suitable for process streams up to 3,200 °F (1,760 °C).
Ametek Inc.
610-889-5234
www.ametek.com
PERFECT THE PULP
Metso Kappa QC is a fiberline analyzer that measures pulp lignin content and brightness. A special stabilizing control works from the oxygen stage to the finished pulp. Users can expand the unit’s capacity by adding measurement modules and sampling points. Users can also leverage the analyzer’s advanced continuous Kappa measurement and COD index capabilities.
Metso  
+35-8400 406 094
www.metso.com