The Great Kanduski: Best Practices in Industrial Networking

Fieldbus On-Line Diagnostics

Because off-line tools by their nature are unable to report back to the appropriate person when something happens the majority of FF Power Supply manufacturers either already offer or I am confident are working on developing on-line network diagnostic modules to continually monitor and report to a central system as...

Off Line Fieldbus Network Analysis Tools

The original network analysis tool was the National Instruments Bus Monitor, developed at approximately the same time as Foundation Fieldbus was being introduced. This tool was designed to monitor the data traffic on fieldbus networks. It was not until Relcom introduced the FBT-3 that a physical layer troubleshooting tool specific...

ISA Industrial Communications Symposia

Deadlines for the ISA Communications Division two Spring Symposia are quickly approaching. The first event this April in Troy (Detroit) Michigan is a joint offering with the ISA100 WG16 committee that will be two half-days focused on Wireless applications in the Factory environment.

H1 Communication Stack - Connecting the Function Block to the cable

Just like we tend to take the Ethernet chipset in our computer for granted, most End Users are likely unaware that every Foundation Fieldbus H1 device has a similar chipset called the H1 Stack in it.

2012 Outlook

As we start another year what might be influencing or significant in the area of networking this year? I have separated this into two broad categories of expectations or what I think will happen and wishes, things that I hope might happen or products that might come to market.

Reliable Field Power – Achilles heel for Remote I/O

One of the reasons that many facilities do not approve the installation of repeaters on their industrial networks is because these installations all require power for the repeater element and unfortunately finding reliable power where and when you need it is not always a ‘sure thing’ and with the increased...

Canadian Grid Gets Smarter

Approximately a year ago, the Canadian Electricity Association (CEA) recently released version 1 of its CEA Guideline for the Selection and Use of SMART GRID Standards and revised it in June 2011. The 8 page document contains eight fundamental principles and fifteen elective criteria to provide their members (predominantly electric...

New Safety Bus Standard – Mechatrolink

Japan based organization Mechatrolink’s (  Safety Working Group completed a list of specifications  satisfied the requirements of IEC61508 safety integrity level SIL3 for the communications protocol of the MECHATROLINK field network that meets safety standards. TÜV Rheinland, certified the documents in August this year released their Safety bus.

FDI Prototype Demonstration

I just read that the new FDI Corporation is already showing benefits with prototypes of the first FDI components –proof that the concepts being proposed will work have been demonstrated on an ABB system. The prototypes include communications with HART, FF and Profibus protocol devices.

Industrial Data Communications Forum

IDC is preparing a conference event in Brisbane, Australia March 21-22, 2012 that promises an opportunity to network with your peers and learn more about the latest happenings in this exciting and growing field.