WIKA cuts water usage by 70%

July 31, 2008

Lawrenceville, Ga. – Metro Atlanta-based WIKA Instrument Corporation (WIKA) recently announced that it successfully reduced water consumption at its Lawrenceville pressure and temperature gauge manufacturing facility by almost 70% from its April/May 2007 peak usage of 60,300 gallons per workday to its June 2008 usage of only 18,500 gallons per workday.
 
Last fall, a three-person project team of managers identified and implemented water reduction methods that would conserve water and save the company money. The return on investment on implementations to date will be realized in less than one year’s time. The amount of water saved are estimated to 10.5 million gallons annually – enough to fill more than 16 Olympic-sized swimming pools.
 
The most dramatic solution implemented was the installation of industrial “chillers” that cool the recirculating water that cools the facility’s 15 resistance and conductive soldering stations. WIKA installed a “chiller” on another component in its factory that cools water from a washing operation, as well as installed a number of waterless urinals in its men’s restrooms.
 
After realizing the extent of Georgia’s water crisis last year, the management at WIKA Instrument Corporation decided it wanted to do its part in being a good corporate citizen by initiating a water reduction project.
 
“To create a starting point for the project our team looked at WIKA’s big water usages and ways we could reduce or eliminate water usages,” said Cathy Bochenek, WIKA environmental health and safety manager, a member of the team tasked with find potential water savings.
 
 The team looked at everything from extending vacation time, collecting rain water to underground tanks and well-drilling. According to Bochenek, the team eventually settled on adding chillers to some of their machinery.
 
 “We ultimately went with the least expensive option that would have the fastest outcome,” said Bochenek. “Through research, we discovered that adding chillers at different operations would have a return on investment in less than a year.” 
 
WIKA’s Facility Manager, Peter Braun, explained that the company does a lot of soldering, which uses of a lot of water. Installing chillers in the soldering process enables the circulation and reuse water and because the system is closed, water evaporation is eliminated as well.
 
The installation of chillers in production has paid off immensely in dollars and in water reduction. “We decided to benchmark our project this past June. We looked at our June water billing statement and compared it to last year. The results were tremendous,” said Bochenek. “Last year at this time we peaked at 60,300 gallons of water per workday. June’s statement showed that we used less than 18,500 gallons per workday, which is almost a 70% reduction!”

Along with increased production, the water reduction project has also helped to increase awareness with WIKA employees. “This project has shown our employees, and hopefully the community too, that we all have to do our part in helping to reduce water usages,” said Braun. “By seeing the efforts the company is making to reduce water usages, our employees see that WIKA cares about them and the environment.”
 
Braun concluded by saying, “We realized that we all needed to do our part, and we could not have been happier with the results of our water reduction project. The payback has been great, and it has allowed our company to be a good corporate citizen.”