Home » Yokogawa Snubs WirelessHART Users at the launch of the "World's first" ISA100.11a Wireless Transmitters
Yokogawa Snubs WirelessHART Users at the launch of the "World's first" ISA100.11a Wireless Transmitters
By Andrew Bond, Industrial Automation Insider
"ISA100 is the standard that has been developed by the user community, and expresses the wishes of the users, rather than the approach imposed by vendors, as exemplified by WirelessHART," said Joost van Loon, Yokogawa Europe director of industrial automation. "Additionally ISA100 is technologically superior to other approaches, in that it can cover all the wireless solutions that might be required. Users have also requested just one standard, so in the Yokogawa view this should be ISA100."
Van Loon was speaking at the launch of a range of ISA100.11a pressure and temperature transmitters and associated system interfaces at the 5th Yokogawa User Conference, held in The Netherlands from 24-25th June. He was supported by Penny Chen of Yokogawa global marketing, who is also vice chair of the Wireless Compliance Institute (WCI). In response to a query about possible changes to ISA100.11a when the ISA100.12 committee on convergence presents its findings later this year, she asserted that "It is very unlikely that any changes would be allowed to ISA100". The Yokogawa Q+A sheet issued alongside the releases commented on convergence issues further: "In fact, end users are not choosing WirelessHART. The ISA100.12 committee has been advised by user input that there is "no need for backward compatibility with WirelessHART as there is no significant installed base". Quite a snub for the existing users of WirelessHART systems!
Yokogawa excludes WirelessHART
In listening to the user community, Yokogawa is aware that there has been a request for one global wireless standard, and therefore stresses that their offering includes "openness and interoperability" as prime objectives at the heart of ISA100. However "the ideal scenario is unlikely to occur, with two wireless standards in use" and the Yokogawa interoperability does not extend to including WirelessHART in their plans.
The other major player in the ISA100 camp is, of course, Honeywell, and news releases came thick and fast around the Honeywell User Group meeting held in Phoenix, Arizona, from 13-17th June: several of these related to improvements to digital video monitoring and field instrument wireless networks, that are designed to be compliant with the ISA100.11a standard. Most of the questions at the interviews, and the HUG discussions reported, related to the topic of ISA100, and whether this standard will be modified in the near future to include IEC62591, now the WirelessHART standard.
ISA100 panel: user discussions continue
From a panel discussion on the convergence of ISA100 and WirelessHART, Pat Schweitzer of ExxonMobil, also co-chair of the ISA100 committee, had been trying to establish what users would want a combined standard to offer, and said NAMUR would issue a report on this topic in late June (NE133). Meanwhile Schweitzer reported that the ISA100.11a-2009 standard is being corrected, and will be re-issued by December. Schweitzer also commented that the convergence discussions headed by the ISA100.12 committee also hoped to report by December.
The Honeywell corporate view of wireless monitoring and control is not restricted to Honeywell Process Systems: their wireless business is cross divisional - it is a corporate initiative to drive wireless across the whole business, whether this is aerospace, health and safety, life safety or process solutions. In an interview with Walt Boyes of CONTROL Global, Ray Rogowski, business leader for their wireless initiative, stressed that they see a far larger potential for the OneWireless applications in addition to monitoring field sensors. Add to this that the Honeywell OneWireless system is really a combination of up to five wireless systems: the Honeywell approach is to create a wireless infrastructure that will support multiple wireless networks, multiple applications, with specific sensor developments to feed in, possibly on different types of wireless system - an example of this is the support for Wi-Fi devices in addition to the field sensor network.
The inevitable conclusion is that Honeywell would have no problem with running two wireless systems into their networks, WirelessHART and ISA100, if that is needed. The Matrikon acquisition reported last month will enable the integration of third party systems into the Honeywell system via an OPC link, again possibly over OneWireless. In the theme of following the Emerson THUM and the ABB FieldKey, Honeywell showed a new OneWireless Adaptor that connects to wired HART devices, and transmits the full diagnostic info to host systems via an ISA100.11a compliant wireless network, without any significant modification to the conventional 4-20mA loop field wiring. Yokogawa also suggested that they would be supplying such an adaptor, sourced from a suitable third party supplier.
Support for ISA100 and WCI
With the new Yokogawa products compliant with ISA100.11a and GE and Yamatake joining the Wireless Compliance Institute board, alongside Yokogawa and Fuji, Honeywell and ISA100 have gained valuable support recently. However, their spokesmen continue to stress that any ISA100 standard must be based on the total customer requirement, and that these customers are requesting a single wireless standard.
But is that what they're really asking for? Maybe Nivis has the answer. They have now launched a new wireless gateway capable of simultaneously working on both ISA100.11a and WirelessHART protocols. Confusingly, it's just called the "Nivis WirelessHART Gateway", presumably because there were only really WirelessHART sensors available when they named it!
Nivis were one of the major suppliers of equipment for the original Arkema ISA100 trials. Trae Harrison, vp of sales and marketing, explained: "The addition of the WirelessHART Gateway to the Nivis product line enables customers to utilize either ISA100.11a or WirelessHART using the same platform: it is exactly what the marketplace is asking for."
You can't halp feeling that ISA, WCI and Yokogawa have been talking to a different lot of customers, unless, of course, they've only been asking the questions that give the answers they want to hear! Maybe we're fast approaching the point where users will simply adopt WirelessHART and ISA100.11a as appropriate to their particular applications.
The 5th Yokogawa User Conference held in Amsterdam gave an opportunity for a visit to their new and impressive European Headquarters building at Amersfoort. The schedule squeezed in a press conference for the 20 European reporters present to announce the release of "The world's first field wireless devices operating to the ISA100.11a communications standard". The actual release was dated 11th June, and indeed the PR text and pictures were sent out on Friday 11th June, significantly just ahead of the start of the Honeywell User Group meeting on Monday 14th June.
Obviously the marketing department did not want to have to do any rewrites of the text if there were similar announcements planned for release by their colleagues at Honeywell. In the event there was actually no conflicting story, so Yokogawa claimed all the honours for being first to the market with ISA100 sensors, technically.
The actual products released will be available from July, in Japan presumably, and in Q3 2010 in Europe, further extending the launch timescale. They include the EJX-B pressure and DP transmitters, and the YTA series temperature transmitter, both ATEX certified intrinsically safe, and an integrated field wireless gateway ATEX certified type N for Zone 2.
In parallel Yokogawa have added interfaces to their Plant Resource Manager and FieldMate systems to communicate with the wireless system. Yokogawa see the provision of a full range of design and commissioning services for plant wireless networks to be important in enabling customers to take advantage of wireless technology, and will offer such services as a part of VigilantPlantServices from July. Fairly quick to follow will be the offer of a trial kit, for customers to gain experience.
Yokogawa were one of the original suppliers of pressure sensors used for tank level measurement at the Wireless Compliance Institute multi-vendor user test installed at the Arkema plant in Crosby, Texas, which commenced in September 2009, demonstrating equipment compatible with ISA100.11a in operation on a plant: this test also used Honeywell temperature and pressure transmitters and routers and a Nivis gateway (INSIDER, November 2009, page 2).
Anjo Wiegerinck, manager for IA marketing in Europe, also placed considerable emphasis on the wireless experience gained on the Shell Houdini project in Singapore, where Wi-fi systems had been used to enable remote monitoring of video camera information. The demo at the Amersfoort HQ used temperature and pressure transmitters reporting in to the same PC system as Dexter IR and CCTV cameras communicating via a different wireless gateway. The CCTV demo was supposed to provide an alert when Wiegerinck attempted to "steal" the wireless pressure transmitter from its location in the exhibition hall, but the press were later more successful in this activity by making off with the wireless temperature transmitter. There have also been other unspecified plant trials of these wireless transmitters in Japan.
Battery power for the wireless transmitters comes from two D cells, housed in a field and hazardous area replaceable battery package: Henk van der Bent, marketing manager for field networks, announced that Yokogawa wishes to donate the concept and design of this package as a possible industry standard for other wireless users to adopt, enhancing standardization in the industry.
Battery life for these sensors can be as extended as five years, but with faster response times and mesh networking might come down to as low as 6 months. For this reason Yokogawa are pushing ahead with solar powered concepts for the transmitters, and plan to look at other energy harvesting technologies. The battery package has three connections, allowing a battery health monitoring output for alarm notification over the network.
Interestingly the Yokogawa press release mentions this battery assembly as "explosion-proof": it does have a current limiting circuit built into the housing, but the plastic package cannot be described as able to contain any explosion! The 3.5" long by 3" wide battery pack must be taken to a safe area before any attempt is made to disassemble the unit and replace the batteries. Probably in order to contain this size of package, the standard neat EJX wired transmitter, 3" diameter by 4.5" long, is increased in size for the wireless model to a hefty 4.5" dia and 8" long, with a weight increase to match. This was not the case with the wireless versions of the equivalent ABB transmitters (INSIDER, June 2010, page 3).
Exele TopView Enters Strategic Partnership With Canary Labs
Exele Information Systems has entered into a partnership with Canary Labs located in Martinsburg, PA.
VTT TEchnical Research Centre of Finland Predicts Smart Lighting Boom
According to VTT Technical Research Centre of Finland, the lighting systems of the future could be multi-purpose devices not dissimilar to smart phones.
Metso Wins Order from Smurfit Kappa for Metso DNA Control System
Metso has won an order from Smurfit Kappa for the supply of a Metso DNA control system and a pulp cooking process optimization solution to its Cellulose du Pin mill in Biganos, France.
Invensys Acquires SmartGlance Mobile Reporting Product
Invensys, a focused supplier of state-of-the-art industrial software, systems and control equipment to the world's major industries, has acquired the SmartGlance mobile reporting product of Sarla Analytics, LLC, a privately held company headquartered in Barrington, R.I.
ABB Names New CEO: Ulrich Spiesshofer
ABB Names Ulrich Spiesshofer CEO to Succeed Joe Hogan
Avantech Announces C-TPAT Certification
Advantech’s Industrial Automation Group has announced that Advantech has successfully been certified for C-TPAT (Customs-Trade Partnership Against Terrorism).
Significant Increases in Earnings for Oil and Gas Engineers
A report from Rigzone indicates significant upward movement of earnings for engineers in the oil and gas industry
Weekly Roundup. Stories We Covered So You Didn't Have To
Stories from ControlGlobal and elsewhere that caught our eye this week.
Endress+Hauser Releases New Free Online Thermowell Calculator
Endress+Hauser introduces a free on-line thermowell calculation tool to help customers stay compliant with the new ASME PTC 19.3 TW-2010 thermowell standards.
Batch Manufacturing Requires State-of-the-Art Batch Management Software
ARC Advisory Group has released an ARC Insight comparing Batch Management System Software
- All news »
Access the entire print issue on-line and be notified each month via e-mail when your new issue is ready for you. Subscribe today.
- Featured White Papers