TEST-FCI-logo12
TEST-FCI-logo12
TEST-FCI-logo12
TEST-FCI-logo12
TEST-FCI-logo12

Endress+Hauser HART Indicator gives a better overview of the process

Aug. 9, 2016

[sidebar id =1]If you are looking for a simple and economical means of getting a better, more accurate insight into your process or simply a display for a difficult-to-access device, the RIA15 indicator is all you require. This compact device, suitable for panel (IP65) or field (IP66) mounting, can be connected to any HART device. In addition to the primary value, you now have access to up to three other process values as well as status information.

Both panel and field versions have German Lloyd marine approvals and offer optional international Ex certification. The RIA15 indicator can be used in safety instrumented systems (SIL) as freedom of interference on the safety circuit is guaranteed.

The indicator features an easily read, five-digit display with 17 mm (0.67") high characters, units of measure and bargraph. It is configured by three keys and a backlight can be activated when required. Loop-powered, it requires maximum 1.9 V with an additional 2.9 V when the backlight is on. Configurable as either primary or secondary master, the RIA15 provides an inexpensive monitoring solution as no additional system components are required in the loop.

For more information, please visit the Endress+Hauser website.