RSS
Print pageOmega Engineering
Wireless thermocouple connector is a battery-powered thermocouple connector that transmits linearized, cold junction compensation measurements back to a USB powered receiver connected to a PC. Each wireless connector unit can be programmed in the field to work as a type J, K, T, E, R, S, B, N or C calibration connector. The universal input accepts both standard and miniature size mating connectors. When activated, the connector can be used with a single receiver. The included software program converts your PC into a 12 channel meter, strip chart recorder and data logger. Readings can be saved and later printed or exported to a spread sheet file.
Omega Engineering; 203/359-1660
www.omega.com
Company Information
One Omega Drive
Stamford, Connecticut 06907-0047 (see map)
Phone: 203-359-1660
Fax: (203)-359-7700
email: sales@omega.com
Website: www.omega.com
Related Products
- AutomationDirect Konnect-It Terminal Blocks Accept Wide Ranges of Wiring Sizes
- AutomationDirect Flexible Multi-Conductor Control Cable Available from 18 to 10 Gauge
- AutomationDirect's Stainless Steel Fittings
- AutomationDirect's ZIPport Multi-Wire Connectors and Accessories
- Mencom's Module CX-25 Pole Inserts
- AutomationDirect's ZIPport Multi-Wire Connectors and Accessories
- AutomationDirect Expands Its Sensor Cable Offering
- Beckhoff's CP-Link 3 for HMI Installations
- Balluff's BIS-V RFID Controller and IO-Link master in One device
- Ultra Electronics' EOTec 2000
- All products »
Sponsored Links
More content on this topic:
Free Subscriptions
Control Digital Edition
Access the entire print issue on-line and be notified each month via e-mail when your new issue is ready for you. Subscribe today.
- Featured White Papers
