Products

Filter products by:

Sort results by:

Next >>

Displaying 25-48 of 1301 results

GE's Proficy HMI/SCADA - iFIX

Proficy HMI/SCADA - iFIX offers a robust SCADA engine, rich set of connectivity options, open architecture, and highly scalable and distributed networking model.

Category: Software

Product Type: SCADA & Operator Interface

Manufacturer:
GE Intelligent Platforms

Yokogawa Corp. Sencom Liquid Analyzer System

Sencom liquid analyzer system for measuring pH/ORP consists of a special module, cable and PC software.

Category: Measurement & Sensing

Product Type: Analytical

Manufacturer:
Yokogawa

Metso Kappa QC Is a Fiberline Analyzer

Metso Kappa QC is a fiberline analyzer that measures pulp lignin content and brightness. A special stabilizing control works from the oxygen stage to the finished pulp.

Category: Measurement & Sensing

Product Type: Analytical

Manufacturer:
Metso Automation - Field Systems Division

Ametek Inc. Thermox WDG-V

Thermox WDG-V monitors combustion in fired heaters or boilers. It has redundancy and diagnostics to enable predictive and proactive maintenance programs, which helps reduce the risk of uncontrolled combustion events.

Category: Measurement & Sensing

Product Type: Analytical

Manufacturer:
AMETEK

SensoTech's LiquiSonic Analyzer

LiquiSonic analyzer measurements are accurate to ±0.05% and update every second. When results are outside of a defined production range, the unit immediately sends a signal, so users can take timely countermeasures.

Category: Measurement & Sensing

Product Type: Analytical

Manufacturer:
SensoTech

Endress+Hauser Liquiline CM44x Multichannel Transmitter

Liquiline CM44x multichannel transmitter features EtherNet/IP connectivity, which allows it to seamlessly integrate with Rockwell Automation's PlantPAx Process Automation System.

Category: Connectivity

Manufacturer:
Endress+Hauser

Beamex's ICS Integrated Calibration Solution

Beamex's ICS integrated calibration solution can combine calibration equipment, such as pressure, temperature and multifunction calibrators, automatic temperature blocks and automatic pressure regulators; the company's CMX calibration management software; and documentation such as user guides or ...

Category: Software

Product Type: Calibration Management

Manufacturer:
Beamex

Emerson Process Management ValveLink Mobile Version 4.0 Software

ValveLink Mobile version 4.0 software comes pre-installed on intrinsically safe 475 Field Communicators, so operators can configure, calibrate, validate, diagnose and troubleshoot control valves on a Foundation fieldbus network in the field.

Category: Software

Product Type: Calibration Management

Manufacturer:
Emerson Process Management

Emerson Process Management Rosemount Analytical 6888 In-Situ Flue Gas O2 ...

Rosemount Analytical 6888 in-situ flue gas O2 analyzer includes a "calibration recommended" diagnostic with gas-switching solenoids embedded in the probe electronics.

Category: Measurement & Sensing

Product Type: Analytical

Manufacturer:
Emerson Process Management

Martel Electronics LC-110H HART Loop Calibrator

With the LC-110H HART loop calibrator technicians can adjust and configure most of the HART functions of smart transmitters in the field. The handheld can perform a full auto-calibration including PV Zero and PV Span for most HART pressure transmitters.

Category: Portable Calibrators

Manufacturer:
Martel Electronics Corporation

Festo CMSX Process Industry, Closed-Loop Position Controller

CMSX is a process industry, closed-loop position controller for quarter-turn actuators. It’s equipped with two digital output signals for alarms and a 4-20 mA output signal that provides data on the actual position of the valve for greater overall feedback and closed-loop control.

Category: Controllers & Control Systems

Product Type: Loop Controllers

Manufacturer:
Festo

Otek Model 900 Current Loop Controller

Model 900 current loop controller requires no external power to operate. High and low setpoints measure and compare the current loop to a setpoint, turning on or off the isolated solid state relays and alarms LEDs.

Category: Controllers & Control Systems

Product Type: Loop Controllers

Manufacturer:
OTEK

Fluke 721 Dual-Range, Pressure Calibrator

The 721 dual-range, pressure calibrator with dual isolated pressure sensors can take simultaneous static and differential pressure measurements in a single tool for gas custody and transfer applications.

Category: Portable Calibrators

Manufacturer:
Fluke

Yokogawa YS1000 Series Single-Loop Controllers

YS1000 series single-loop controllers feature a LCD screen that has a 1.5 times wider viewing angle than previous models. The LCD can be replaced while the controller is online without interrupting the output of signals to control elements.

Category: Controllers & Control Systems

Product Type: Loop Controllers

Manufacturer:
Yokogawa

Advantech Adam-6022 Ethernet-Based, Dual-Loop PID Controller

Adam-6022 is an Ethernet-based, dual-loop PID controller for general-purpose PID control. User-friendly utility software is included for setting PID parameters (Pv, Mv, and Sv).

Category: Controllers & Control Systems

Product Type: Programmable Controllers

Manufacturer:
Advantech

Red Lion Controls PXU Series PID Controllers

PXU series PID controllers support tight, reliable control over processes, including temperature, flow and pressure, from a single model. The UL-listed devices feature easy-to-read displays, on-demand auto-tuning for easy setup, and thermocouple, RTD, Vdc and current inputs.

Category: Controllers & Control Systems

Product Type: Loop Controllers

Manufacturer:
Red Lion Controls

Rohtek Automation FBs-PLC Series

FBs-PLC series features thermocouple and RTD temperature modules, along with programmable PID algorithms to facilitate closed-loop temperature control.

Category: Controllers & Control Systems

Product Type: Programmable Controllers

Manufacturer:
Rohtek Automation

Opto 22's PAC Project 9.4 Industrial Automation Software

Suite of integrated software components supports new HART protocol SNAP I/O modules, HMI data logging to SQL and other ODBC databases, and Unicode text for HMI localization

Category: Software

Product Type: SCADA & Operator Interface

Manufacturer:
Opto 22

Mitsubishi Electric Automation's MC Works64 Software Suite

Works64 improves the visibility of manufacturing operations.

Category: Software

Product Type: Process Control

Manufacturer:
Mitsuibishi Electric Automation

Invensys Foxboro’s Intelligent Marshalling Solution

Invensys Foxboro's Intelligent Marshalling solution features the Universal Fieldbus Module, a per-channel, configurable I/O module that supports a variety of analog and digital signal types.

Category: Input/Output Systems

Manufacturer:
Invensys Foxboro

Belden's Tofino Xenon Security Appliance

Tofino Xenon security appliance protects automation networks and is customizable for use in electrical substations, hazardous environments or transportation systems

Category: Controllers & Control Systems

Product Type: Safety & ESD Systems

Manufacturer:
Belden

GF Piping's Ultrasonic Flowmeters

These ultrasonic flowmeters come in portable and fixed-installation models.

Category: Measurement & Sensing

Product Type: Flow

Manufacturer:
GF Piping Systems

ABB's Econolev LMG100 Magnetic Liquid Level Gauge

The gauge consists of an all-stainless steel chamber and a magnetic float with an orange magnetic shuttle indicator.

Category: Measurement & Sensing

Product Type: Level

Manufacturer:
ABB

Endress+Hauser's Deltabar FMD71 Level Transmitter

Deltabar FMD71 level transmitter uses two pressure sensor modules, each connected electronically to a single transmitter.

Category: Measurement & Sensing

Manufacturer:
Endress+Hauser

Next >>

Displaying 25-48 of 1301 results