Voices: Hebert

Calibration Can Be Condition-Based

Calibrating Industrial Devices Only as Needed Is the Better Method, and That Requires Automating the Calibration Process

By Dan Hebert

Process plants abound with instruments, analyzers and control valves, all of which need calibration to ensure performance as designed. Many plants calibrate these devices at fixed intervals, but that's less than optimal for a number of reasons. First, it's expensive, as many devices can operate within parameters on extended calibration schedules.

Second, it can result in poor operating performance, as some critical instruments should be calibrated more frequently. Third, plant safety can be compromised if safety-related devices drift out of calibration between intervals.

Calibrating each device only as needed is the better method, and that requires automating the calibration process. Smart devices can provide information to an asset management system (AMS) or a calibration management system (CMS) over a digital data link. These systems use this information to determine optimal calibration intervals. They also send data to documenting calibrators, which are used to calibrate the devices. After calibration, these calibrators upload the "as left" condition of the device to the system.

Here's how it works in practice. "Our customer GlaxoSmithKline (GSK) has a pharmaceutical manufacturing plant in Cork, Ireland, with more than 4000 control loops with HART and Foundation fieldbus," says Laura Briggs, the product manager for asset optimization at Emerson Process Management.

Also Read "Why calibration measurement software?"

Plant personnel were routinely calibrating instruments that did not need the same level of attention as devices that were critical to product quality or safety. To determine which instruments could be moved from the periodic schedule to on-demand calibration, they examined the diagnostics generated by every smart field device and digital valve positioner using Emerson's AMS Suite predictive maintenance software. They began monitoring a select group of less critical instruments, waiting for them to indicate that a change had taken place internally requiring attention. As time progressed, all of the smart devices were migrated to on-demand calibration.

Streamlining regular calibration procedures is based on optimizing the plant's periodic calibration schedules using documenting calibrators and synchronizing instrument data between Beamex's CMX CMS and Emerson's AMS Suite. Calibration data on every instrument is stored and downloaded directly to a portable calibrator for use by a technician in the field. When the scheduled calibrations are completed, the results are uploaded for certification and documentation.

"Savings due to this paperless calibration procedure were 15 minutes cut from each calibration, 21,000 sheets of paper eliminated each year and more than 500 hours per week of manual data entry time eliminated, along with potential errors," notes Briggs.

GSK also extended the interval between calibrations to reduce the overall number of procedures done annually while remaining in compliance with corporate policy and government regulations. The company achieved this through an ongoing, computer-driven analysis of historical data to identify instruments that didn't need to be calibrated as often, resulting in an 8% reduction in scheduled calibration.

Substantial upfront effort is required for any calibration optimization project. "The most time-consuming aspect of getting started isn't the acquisition cost of the equipment or software, but rather populating and setting up the AMS or CMS software with the information from the critical tags and their calibration attributes," explains Jim Shields, process tool marketing manager, Fluke.

"Once the CMS is populated, the data can be mined to make more educated determinations of instances where maintenance intervals can be adjusted," Shields adds. "Most CMS packages have tools for drift plot analysis to help examine the performance of a device, its errors and drift since its last calibration. If these or other tools show a device is performing reliably, then it's a good candidate for an extended maintenance interval."

More from this voice

Title

A Too-Smart Solution?

The benefits of installing smart metering systems in the plight of utilities are clear, but implementation is complex.

08/01/2007

Advanced Process Control Ain't Easy

End Users and Suppliers Agree: Advanced Process Control Is a Powerful and Effective Tool, but Implementation and Maintenance Need to Be Simplified

11/01/2012

Advanced Process Control-Complex Solution for Complex Problems

Recent Advances Have Reduced the Cost and Complexity of Implementation and Maintenance, Making APC a Viable Option

11/07/2012

Advances in IT Improve Process Automation

Virtualization, Thin Clients and Other Technologies Borrowed From IT Data Centers Are the Next Big Thing in Process Automation

04/03/2013

Aero-Derivative Advanced Control

What's APC and What's Just a Collection of Clever Programming Blocks?

10/31/2012

Alarm management improves plant operations

Alarm management is a hot topic, perhaps because incorrect presentation of alarms often confuses operators. This article shows how better alarm management empowers operators to improve plant performance.

01/05/2007

An alarming situation

Alarm systems of one type or another always have been part of industrial machine, robot, and skid control systems, but CONTROL Senior Technical Editor Dan Hebert, PE, notes that there's more to alarm technology than meets the eye ... or ear for that matter.

06/05/2005

Analyzers not ready for prime time

It is easy to see why the analyzer market doesn’t work for end users, but it is harder to find a solution. Clues can be found, however, in one small part of the analyzer market that is improving rapidly.

11/02/2006

Applied control theory moves out

Industry group gets automation industry support from companies that believe the partnership between industry and academia is most beneficial when theory moves out of the classroom and into the plant.

06/20/2005

Are Integrated Safety/Security Systems Secure?

Process Plant Safety Used to Be Relatively Simple

10/30/2008

Automation and Process Control Specialists: Roll Your Own

How to Be Successful When Hiring New Automation Professionals

07/09/2012

Automation Professionals Fill the Gap With Off-Site IT Teams

Advantages and Disadvantages of Having a Remote IT Department. What Works for Your Business? Should You Manage IT from Off-Site?

03/11/2013

Automation Professionals Work From Home

There Are No Reasons One Could Not Work On Project Files Anywhere

07/15/2013

Automation Software: Using SharePoint on a Project

Maverick Said Customizing SharePoint Was the Key to Project Cohesiveness and Success

07/15/2013

AutomationXchange event report

While basic plant-floor automation is no longer a mystery, advanced control often is, making techniques for solving difficult process control problems of high interest to end users and service providers.

12/14/2006

Basic Training -- Cybersecurity Style

Cybersecurity Is a Must-Have Skill in Your Process Automation Toolbox.

03/07/2008

Before You Buy Your Next IPC, Read This

An Industrial PC (IPC) Can Perform Just as Well as a DCS or a PLC, and Thin Clients May Offer Additional Benefits

07/15/2013

Calibrate This—Electronically

Moving From a Paper-Based System to an Automated One Can Bring a 15% to 25% Improvement in Efficiency

02/05/2008

Calibration Can Be Condition-Based

Calibrating Industrial Devices Only as Needed Is the Better Method, and That Requires Automating the Calibration Process

03/14/2014

Cloud-Based Asset Management

Suppliers Can Use the Cloud to Provide Remote Access to End Users, and to Analyze Data for Asset Management and Other Purposes

11/18/2013