Voices: Larson

Sonatrach Manages Risk with Lifecycle Services

Algerian Energy Company Adapts to the New, While Preserving Past Investments

By Keith Larson

HUGEMEA Banner

Operational risk can take many different forms. Continuing to rely on older, obsolete control systems presents one set of downsides. But moving forward to the new and unfamiliar can be risky as well. Sonatrach, the Algerian-based energy company, recently faced just such a dilemma, related Abderahmane Frih, Sonatrach control engineer, in a presentation to fellow process automation professionals from the Europe, Middle East and Africa (EMEA) region at the Honeywell User Group (HUG) meeting, November 4-7, in Nice, France.

At the company's natural gas liquefaction and processing facility on the North African country's western Mediterranean coast, several major pieces of equipment were due for overhaul, and presented an opportunity to overhaul its aging controls infrastructure as well. The plant's 1990s-era Honeywell TPS network had begun to show its age, and the operating system for its Windows XP consoles was scheduled to be unsupported by Microsoft come April, 2014.

Read Also: A Shared Stake in Customer Success

Sonatrach entertained the two paths forward: a full-scale migration to the Experion PKS, complete with new fault-tolerant Ethernet (FTE) network and C300 series controllers; or a more affordable network retrofit that effectively replaced the older Universal Control Network (UCN) with its FTE successor, Enhanced UCN (EUCN), together with new Experion PKS consoles.

From a hardware perspective, the latter approach involved swapping out controller and network interface cards such that all their Network Interface Modules (NIMs) became ENIMs, and their High Performance Managers (HPMs) became EHPMs. Importantly, this approach would allow Sonatrach to begin to leverage new network and HMI technology while preserving the company's investment in control programming and strategy development.

A full migration to Experion, on the other hand, would also have required re-engineering of the underlying code, a risk the company didn't care to take, Frih said. "The re-engineering of our control strategies would have been a more extensive effort entailing a longer shutdown, a longer FAT [factory acceptance test]," Frih said. "So we chose EUCN instead of the full C300 transition," he said.

To execute the transition, Sonatrach entered into a three-year-long Lifecycle Management (LCM) agreement with Honeywell that will also allow the plant some breathing room to plan for longer term evolution. "Cost and downtime were key considerations," Frih said. "This was the lower risk decision."

More from this voice

Title

Yokogawa shedding quiet company image

While it’s difficult to gauge quantitatively where Yokogawa stands in its market-share quest, recent project wins reflect the aggressive moves the company is making to become a more dominant global leader.

02/01/2007

Wireless Trialed to Reduce Overflow Risk

Chevron Demonstrates Use of Wireless Level Switches as an Independent Protection Layer

10/26/2012

Whither the Book? One Future of Reading

The Amazon Kindle’s Direct Internet Connection Promises to Propel E-Readers from the Margins of Geekdom to the Mainstream

04/04/2008

What kind of training do you really need?

As supervisors and employees from outside the research environment are surveyed on thesis-based degree programs, continuing education expectations will converge—and not toward those of the supervisors.

11/10/2006

Users Weigh Risks in Migration Decision

Are Your Automation Systems Starting to Work Against You?

11/06/2012

Users Challenged by PLC Lifecycle

ExxonMobil Talks About the Industry's PLC Lifecycle Management Challenges

10/29/2012

The State of Operator Effectiveness

Operators Can Influence Plant Performance Significantly

05/17/2012

The Road Ahead: From Content to Community

Today, Control isn’t just a U.S.-focused print magazine, but an increasingly global and interactive community.

12/10/2007

The rise of the User Group meeting

Whether they’re called fairs, exchanges, summits, worlds, symposia, or user conferences, hosting or attending at least one such event each year is now a routine part of how industrial automation gets done.

07/19/2006

The new energy opportunity

The changing energy landscape promises to keep process automation professionals quite busy for many years to come. Now, if we can just get that potential through to a few more idealistic adolescents…

03/09/2007

The Journey from Process to Profit Control

Real-time Economic Measures Needed to Spark Culture of Performance

09/12/2013

Systems Update Balances New Capabilities, Lifecycle Support

Honeywell Users Treated to Past, Present and Future Technology Perspectives

11/29/2012

Sustainability, Interrupted

Sustainability Makes Business Sense as Well as Good Policy. The Public will Demand It and Science and Technology Will Make It Happen

03/09/2009

Spiral Strengthens Invensys' Refining Hand

Delivering End-to-End Optimization of the Crude Oil Value Chain

10/18/2012

Sonatrach Manages Risk with Lifecycle Services

Algerian Energy Company Adapts to the New, While Preserving Past Investments

12/05/2013

SmartLine Transmitter Family Extended to Temperature

New Features and Performance Characteristics Add Up to Intuitive Use, Low Lifecycle Costs

11/26/2013

SmartLine Transmitter Boasts Modularity, Ease-of-Use

Attention to Human Factors Helps Streamline Operator Tasks, Avoid Errors

11/30/2012

Slideshow: Images from the Fieldbus Foundation's 2013 General Assembly in Shanghai

Learn More About What Was Discussed in the Fieldbus Foundation's 2013 General Assembly in Shanghai. Here Is a Slideshow With Details

04/19/2013

SIS Migration Opens Door to Integrated Safety

Repsol Embarks on Seven-year Migration to Unify its Control and Safety Systems

12/05/2013

Simulator Training Boosts Competence, Confidence

Better Trained Operators Can Help Increase Plant Safety, Reduce Start-Up Time and the Number of Unplanned Shutdowns

05/17/2012