Model IPS-4 full-spectrum analyzer measures up to eight components using the most favorable absorptions in both UV and IR spectrums. It is equipped with analog (4-20 mA) and digital communications capabilities, including RS232, RS485 with Modbus RTU protocol and a built-in fast Ethernet port, and features a stainless-steel, 22-key keypad, and a four-line vacuum fluorescent display.
Ametek Process Instruments
|WATER SAMPLING SOLUTIONS
The stationery Liquistation CSF48 and the portable Liquiport CSP44 monitor influent and effluent at water/wastewater treatment plants and other industrial processes. CSF48 accepts hot plug-and-play inputs from up to two Memosens digital sensors to measure nitrates, conductivity, oxygen, pH, ORP or turbidity. Each unit can store up to 100 programs and run up to 24 programs at a time.
The ePurge X is a purge controller with fully automated purge and pressurization functions. Its digital mass flow sensor self-regulates purge duration. The purge pressure range is minimum 4 bar (60 psi) and maximum 8 bar (115 psi). The operating temperature range is -20 °C to 55 °C. ePurge X is certified in hazardous areas to NEC Class 1, Division 1, Groups C, D and IEC: Zone 1, Group IIB.
RHPS series LRS(H)4 spring-loaded pressure regulator provides high accuracy for analyzer applications. It is constructed of 316L stainless steel and available in many configurations. It is designed to handle 400 bar (5,801 psig) inlet pressure (2.2mm seat), and features a low-torque, no-wear stem and removable hardened cap. Temperature performance range is from -20 °C to 80 °C (-4 °F to 176 °F).
GAS CHROMATOGRAPH UPGRADE