Emerson helps upgrade Solutia's chem plant in South Wales

Emerson Process Management provided the control system upgrade at Solutia's 316-acre site in Newport, South Wales.

Emerson Process Management has completed the second phase of a major upgrade of the control system at the Solutia chemical manufacturing plant in Newport, South Wales, migrating their existing control system to a DeltaV digital automation system. The three-phase project restructures the system architecture to a high speed, fiber-based system, upgrades existing PROVUE consoles to the latest DeltaV consoles and integrates the three existing control rooms into one centralized location.

Emerson worked with Solutia on a worldwide basis to develop a System Life Plan. This involved assessing the systems investment and prioritizing the needs of individual sites. The Newport plant was planned for phased migration from the current DCS to the DeltaV system. The objectives of the upgrade include increased flexibility, increased speed of communications, more robust infrastructure, increased reliability and a standardized control system across the company’s manufacturing sites.

Solutia needed to restructure their system architecture in line with current needs, and wanted to take advantage of the benefits of the latest fiber optic networks. Phase I of the project was to upgrade from the PROVOX Highway 1 based on copper cable, to the much faster Highway 2 network, that uses fiber optic technology. This was implemented by two Emerson engineers working on site with four Solutia engineers.

To reduce the time the plant would be off-line, preparatory work and the installation of new hardware and associated cabling were completed in advance. The upgrade was finished within the two-day planned shutdown that was scheduled for the company to carry out major maintenance work and in-vessel inspections. The project required just 30 hours to complete, and the plant was back on line as planned. The changeover was straightforward, and there have been no further interruptions to production.

The second phase of the project was to upgrade the operator consoles that were approaching the end of their life. Solutia has one console in operation in the plant production area and is planning to install a further three, one of which will be used for systems development. All will be Windows based.

Emerson's DeltaV digital automation system allows multiple production units to be controlled from Solutia's central control room.

Phase 3 of the project involves consolidating the three existing control rooms into one centralized control room. This integration will provide cost savings and improvements in efficiency. It will also ensure that all units are operated from a location well removed from major accident hazards. Completion of this phase will enable multiple production units to be run from a central location.

As part of a separate project, the boiler plant on site now has a DeltaV controller acting as an interface between a PLC and the operator station. The DeltaV controller was chosen for the interface based on its flexibility for the application. It also enables remote operation of the boiler.