Home

Reader feedback: Do we need a gateway?

July 22, 2015

Would ISA 100.11 devices also have to speak HART IP?

I don't grasp how I don't need a gateway. My WiHART devices are not IP-addressable so far as I've seen. And what entity does all the path/route optimizing and management of the device network? Would ISA 100.11 devices also have to speak HART IP? Does this mean HART IP supports function blocks?

About the Author

John Rezabek | Contributing Editor

John Rezabek is a contributing editor to Control.

Continue Reading

Special rules for tuning level controllers

We're Leveling With You

Sponsored Recommendations

2024 Industry Trends | Oil & Gas

We sit down with our Industry Marketing Manager, Mark Thomas to find out what is trending in Oil & Gas in 2024. Not only that, but we discuss how Endress+Hau...

Level Measurement in Water and Waste Water Lift Stations

Condensation, build up, obstructions and silt can cause difficulties in making reliable level measurements in lift station wet wells. New trends in low cost radar units solve ...

Temperature Transmitters | The Perfect Fit for Your Measuring Point

Our video introduces you to the three most important selection criteria to help you choose the right temperature transmitter for your application. We also ta...

2024 Industry Trends | Gas & LNG

We sit down with our Industry Marketing Manager, Cesar Martinez, to find out what is trending in Gas & LNG in 2024. Not only that, but we discuss how Endress...