Addressing Chinese-made equipment in the electric industry – a success story

Nov. 18, 2021
Monday, November 15, 2021 a public utility commission in a hearing on a major new transmission project referenced my blog on the DNI report on Chinese-made transformers, https://www.controlglobal.com/blogs/unfettered/dni-identifies-chinese-transformers-as-cyber-vulnerable-risks-yet-doe-and-industry-ignore-the-threat/ in a question to the utility. In response, the utility stated they would not be using Chinese-made transformers in this project. I consider that to be a success. Shouldn’t other public utility commissions be asking the same questions? 

Monday, November 15, 2021 a public utility commission in a hearing on a major new transmission project referenced my blog on the DNI report on Chinese-made transformers, https://www.controlglobal.com/blogs/unfettered/dni-identifies-chinese-transformers-as-cyber-vulnerable-risks-yet-doe-and-industry-ignore-the-threat/ in a question to the utility. In response, the utility stated they would not be using Chinese-made transformers in this project. I consider that to be a success. Shouldn’t other public utility commissions be asking the same questions?

Joe Weiss

About the Author

Joe Weiss | Cybersecurity Contributor

Joe Weiss P.E., CISM, is managing partner of Applied Control Solutions, LLC, in Cupertino, CA. Formerly of KEMA and EPRI, Joe is an international authority on cybersecurity. You can contact him at [email protected]

Sponsored Recommendations

Municipalities are utilizing inline total solids measurements to enhance sludge thickening, lower polymer usage and cut operational expenses.
Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...