Panel session on using cyber to manipulate physics to cause kinetic damage

Oct. 7, 2017

October 25th at the 2017 ICS Cyber Security Conference in Atlanta, Neil Holloran, Ken Loparo from Case Western, and myself will host a panel session on using cyber means to manipulate physics. 

October 25th at the 2017 ICS Cyber Security Conference in Atlanta, Neil Holloran, Ken Loparo from Case Western, and myself will host a panel session on using cyber means to manipulate physics. I believe too much focus has been on traditional cyber threats and associated malware. The ability to use cyber to cause a physical system to operate in an unstable mode can result in catastrophic damage that cannot be mitigated by traditional cyber means. The Aurora vulnerability is one example of using cyber means to initiate physics issues to damage hardware and other actual examples will also be discussed. These types of attacks often cannot be detected as being cyber-related. The panel will also provide a parallel to military operations.

Joe Weiss

About the Author

Joe Weiss | Cybersecurity Contributor

Joe Weiss P.E., CISM, is managing partner of Applied Control Solutions, LLC, in Cupertino, CA. Formerly of KEMA and EPRI, Joe is an international authority on cybersecurity. You can contact him at [email protected]

Sponsored Recommendations

Municipalities are utilizing inline total solids measurements to enhance sludge thickening, lower polymer usage and cut operational expenses.
Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...