Bill Goble and Luis Duran: Eliminating Common Cause Failures in Safety Control Systems

    Sept. 28, 2009

    Last week I hosted a webinar with exida's Bill Goble and ABB's Luis Duran on the elimination of the biggest argument against combining safety controls and process controls in the same system.

    We"ve added this webinar to our knowledge centers and you can watch the recording here:

    http://www.controlglobal.com/knowledge_centers/abb/index.html?DCMP=ILC-mainnav_to_abbkc

    Last week I hosted a webinar with exida's Bill Goble and ABB's Luis Duran on the elimination of the biggest argument against combining safety controls and process controls in the same system.

    We"ve added this webinar to our knowledge centers and you can watch the recording here:

    http://www.controlglobal.com/knowledge_centers/abb/index.html?DCMP=ILC-mainnav_to_abbkc

    Continue Reading

    Sponsored Recommendations

    Municipalities are utilizing inline total solids measurements to enhance sludge thickening, lower polymer usage and cut operational expenses.
    Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
    Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
    An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...

    Latest from Home

    Source: MxD
    Figure 1: Steady streams of students and other visitors take in the digital and cybersecurity demonstrations at Manufacturing times Digital (MxD) institute, which provides participants with programs in digitalized tools, cybersecurity and workforce expertise.
    Two petrochemical workers inspecting pressure valves on a fuel tank
    Source: Endress+Hauser
    Endress+Hauser’s local and regional outreach efforts include collaborating with k-12 schools, colleges and universities, and its larger communities, via its Community Career+Education Forum (CCEF) that’s been held annually since 2014. These events were joined in 2022 by its Design & Innovation Studio program for coding, 3D modeling, robotics and automation.

    Most Read

    Sponsored