The TTF300 headmount temperature transmitter is available in HART, Foundation fieldbus or Profibus. Its large LCD display enables users to easily adjust to process requirements at the transmitter and at the process. The terminal block with cable guide ensures a secure connection with a IP 66/67 (NEMA 4X) aluminum or 316L stainless-steel housing.
ABB Measurement Products
800-435-7365
www.abb.com
Jumpflex signal conditioners cover the complete bandwidth of temperature coefficients from PT100 sensors up to KTY and Ni sensors. Each DIN-rail device converts temperature signals to standard analog signal types. They have a -25 °C to +70 °C operating range and provide safety/reliability via 2.5-kV, three-way isolation and signal transmission accuracy of <0.1% full scale.
Wago
800-DIN-RAIL
www.wago.us
The new TD Series temperature transmitters for food and beverage applications have laser-welded, integrated transmitter electronics, process connectors and Pt1000 Class “A” RTD probes that are IP69K-sealed to meet 3A standards. They’re corrosion-resistant. The two-wire, loop- powered transmitter is pre-scaled for ranges of 0-100 °C and 0-300 °F.
ifm efector
800-441-8246
www.ifm.com/us
ST130 Series temperature transmitters are ATEX-approved for use in explosive atmospheres. These thermocouple and RTD transmitters are USB-configured, loop-powered and provide a proportional 4-20-mA output. The official ATEX certification is Ex II 3 G Ex nA IIC T4 Gc -40°C ≤ Ta ≤ +80°C (explosion-protected for Category 3G, Group II, Zone 2 gas atmospheres; non-incendive).
Acromag
248-295-0865
www.acromag.com
The new HC2SH probes for humidity, temperature and dew points with AirChip3000 technology allows adjustment of the probe at up to 100 points of RH. It offers compensation of humidity and temperature at 30,000 reference points, recording of 2000 data points, and calculation of the current dew point. It also combines within itself an ASIC, microcontroller and an EEPROM.
Rotronic
631-427-3898
www.rotronic-usa.com
OM-CP-RFOT series of splash-proof, wireless temperature data loggers for the the meat processing industry are equipped with flexible piercing probes for use in the harshest environments, and are ideal for smokehouses, ovens and other cooking processes. They offer two-year battery life, memory wraparound, minimal long-term maintenance, and CE-, HACCP- and USDA-compliance.
Omega
888-826-6342
www.omega.com
WIRELESS TEMPERATURE TESTING
The CNX wireless system wirelessly connects multiple measurement modules, and sends simultaneous readings to a master device up to 20 meters away. The CAT III 1000-V/CAT IV 600-V multimeter displays its readings along with live readings from up to three other measurement modules. AC voltage, AC current clamp, iFlex AC current clamp and K-type temperature modules are available.
Fluke
800-443-5853
www.fluke.com
The MAQ20 industrial data acquisition and control system is ideal for temperature measurement. Its thermocouple modules have eight differential input channels. There are separate models for interfacing to Types J, K, T, R and S thermocouples. In addition, all the thermocouple channels are individually configurable for range, alarm limits and averaging.
Dataforth
800-444-7644
www.dataforth.com
The ProSense line now includes head-mounted and DIN rail-mounted temperature transmitters in non-programmable and programmable models. Non- programmable models are available for thermocouple Types J, K or T and 3-wire RTD type Pt100. Head-mounted models powered by 8 to 35 VDC; 35-mm DIN rail-mount models are powered by 12-35 VDC.
Automation Direct
800-633-0405
www.automationdirect.com
HumidIcon digital humidity/temperature sensor combines digital output, relative humidity and temperature sensing. Applications include precision relative humidity and temperature measurement for microenvironments, and condensation removal in compressed air lines, industrial HVAC/R systems, thermostats, humidifiers/de-humidifiers and humidistats.
Honeywell Sensing & Control
763-954-5093
http://sensing.honeywell.com
This free, online thermowell calculation tool is compliant with the new ASME PTC 19.3 TW-2010 standards. It calculates the thermowell’s ability to withstand stresses under given process conditions. The sizing calculator allows users to make preliminary calculations to select the right thermowell early on in the design process—in just a few clicks. It’s available on-line via the E+H Applicator tool.
Endress+Hauser
888-363-7377
www.us.endress.com
The MINI Analog family includes two universal software programmable temperature transducers that convert and condition signals from most of the common RTDs and thermocouple temperature sensors, including sensors to meet GOST standards. The MINI Analog family has a 6.2-mm thin housing and T-bus power bus capabilities that save space and drastically reduce installation time.
Phoenix Contact
800-322-3225
www.phoenixcontact.com
KS98-1 is a configurable multi-function controller that allows flexibility in the execution of process control tasks in steam and hot water boiler applications. Energy demand is determined by a PID controller, which operates the individually controlled device. If the relevant setpoint has not been reached, an additional device is switched on or off as required to manage demand correctly.
West Control Solutions
www.West-CS.co.uk
Ideal for those who prefer the readability of a digital thermometer, Palmer Solar Digital Industrial has a ½-in. high LCD screen. Powered by a built-in solar cell, its batteries never need replacing, and even a flashlight is enough to power it. This easy-to-read model is completely mercury-free for safe installation in a variety of environments. Models with 4-20-mA transmitter capability are available.
Palmer Instruments
800-421-2853
www.palmerwahl.com
Worm flexible temperature sensor offers a universal sensor strategy with response times 13% faster than straight sensors. It trims to length to handle nearly every thermowell assembly, transmitter head, hockey-puck connection head and dual-sided enclosure. It’s available with a variety of RTDs and thermocouples, including ohm, platinum, copper, nickel RTDs, J- and K-type thermocouples.
Moore Industries-International
818-894-7111
www.miinet.com
YTMX580, built on the ISA100.11a wireless standard, is a battery-powered temperature transmitter with an eight-analog input channel. Each input is configurable for thermocouple, RTD, DCV and 4-20mA measurement. The intrinsically safe battery pack, designed for field replacement in hazardous areas, uses two D-size, 3.6-V, long-life, lithium-thionyl chloride batteries.
Yokogawa
www.field-wireless.com/en/
BAS-3018BC module communicates via a BACnet MS/TP Server, serial RS-485-based protocol in master or slave modes for building automation. There are eight isolated, universal input channels, each individually configurable, with sensor input types such as RTD, either Pt-100 or Pt-1000; thermistor, either 3K or 10K; as well as common analog input signals such as 4-20mA or 0-10 VDC.
Advantech
888-576-9668
www.advantech.com
For demanding temperature measurement applications, RTT80 temperature transmitter provides the best solution. It is a mid-tier, two-wire temperature transmitter available with HART and soon-to-be-released Foundation fieldbus protocols, dual sensor inputs, universal housing, diagnostics, alarms, RTDs and TCs. It also provides diagnostics according to NAMUR NE107.
Invensys Foxboro
949-455-8132
www.fielddevices.foxboro.com

Leaders relevant to this article: