Model 5100HD gas analyzer is capable of dual stream analysis and can measure any two combinations of water vapor, methane, hydrogen sulfide, carbon dioxide and oxygen in process or flue gas. The standard version has its sample cell heated to a maximum of 100 °C. The instrument is set up to perform all-digital implementation of wavelength modulation spectroscopy (WMS).
Ametek Process Instruments
Markland Model 502 suspended solids meter can be used to measure the concentration of the backwash sludge from sand or membrane filters before it is sent for further processing. It also is used to measure primary, secondary and return-activated sludges, industrial sludges and process slurries. The meter can be mounted in open top tanks or pipelines.
Markland Specialty Engineering
Wind online controller fully integrates the functions of a transmitter, PLC, data logger and auto-dialer into a rugged, industrial, NEMA 4X package. It has a flexible multi-input/output platform, a wide range of analytical sensor measurement capabilities. It’s an ideal solution for applications in the drinking water, wastewater, metal finishing, food and beverage, and environmental fields.
Rosemount Analytical X-Stream XE process gas analyzer combines web-browser-based accessibility with advanced processing. It features an expanded graphical display and more powerful electronics and uses many of the same internal components as other X-Stream models, enabling the installation of the multiple product models without requiring an expanded spare parts inventory.
Emerson Process Management
TLG-837 analyzer is a solid state, in-situ solution for tail gas process analysis in sulfur recovery applications. Equipped with an industrial grade UV-VIS diode array spectrometer, TLG-837 simultaneously monitors H2S, SO2, CS2, COS and sulfur vapor concentrations in the process stream, and computes the control parameter for a continuously reliable air demand signal.
Limas23 is a solution for the continuous measurement of nitrogen oxides, sulfur dioxide and oxygen in one analyzer. It measures the components NOx as NO and NO2 without the use of a converter. The smallest measuring ranges are NO: 0-50ppm; NO2: 0-50ppm; SO2: 0-100ppm. It offers additional O2 measurements in one analyzer and quartz cells for highly corrosive sample gases.