1660601595576 Ehproductimage301

Endress+Hauser Supports Mobile Device Configuration in Ex Zone 1

March 25, 2019
Field Xpert SMT77 allows field device configuration from anywhere in a plant
Field Xpert SMT77, Endress+Hauser’s latest addition to its mobile asset management portfolio, allows users to configure field devices in practically all areas of a plant. Certified for use in Zone 1 (Class 1, Division 1) applications, it has ATEX, IEC and UL approvals. It can be connected remotely (HART over PROFIBUS/PROFINET) or point-to-point via a modem to HART, WirelessHART and FOUNDATION fieldbus as well as to PROFIBUS and Modbus devices.

Touch-enabled, Field Xpert SMT77 is sold as a complete solution with pre-installed driver libraries that can be securely updated online. Its state-of-the-art operating interface allows fast, single-tap connection to devices and a clear overview of important device parameters in up to 20 languages (dependent on DTM support). Maintenance activities are supported by NAMUR NE 107 diagnosis, PDF documented Heartbeat verification as well as device information and documentation. Endress+Hauser IIoT applications are also on call.

With IP65 protection and of ruggedized construction, Field Xpert SMT77 is a device ideally adapted to field environments. It has a large, easily-to-read 10.1-inch screen and a battery that can be exchanged in explosion-hazardous areas. Whether for commissioning or maintenance, a tablet that meets the highest demands!

For more information, please visit the Endress+Hauser website.

Sponsored Recommendations

Municipalities are utilizing inline total solids measurements to enhance sludge thickening, lower polymer usage and cut operational expenses.
Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...