IntraVue Edge is a permanent industrial network documentation and monitoring solution. By simply connecting it to a network that needs to be scanned, IntraVue Edge can continuously monitor the status of all devices and switches in the network. It's physically hardened with a fanless design, and is designed for compliance with Center for Internet Security (CIS) benchmarks.
Panduit
800-777-3300
Free cloud service with router
StrideLinx Cloud service has been upgraded to give users an end-to-end cloud solution that offers improved collaboration, advanced user management, easier navigation and customized, user-defined dashboards to make remote access and monitoring easier. StrideLinx secure VPN lets users securely connect to remote systems by using a low-cost VPN router and free cloud service. StrideLinx VPN routers come in wired, wireless or cellular versions, and provide an outgoing secure connection from remote systems to users.
AutomationDirect
Codeless system integration
IntelligenceHub software represents processes and systems with key information suited to each user's needs. It contextualizes thousands of data points by adding meta data, standardizing data attributes, and normalizing units of measure. IntelligenceHub collects and publishes data over open standards and native connections—eliminating the need for custom-coded integrations. It also easily configures and manages multiple connections and their respective inputs and outputs within the script-free interface.
HighByte
844-328-2677
Convenient, low-cost security
FL mGuard 1102 and FL mGuard 1105 security devices use trusted routing, NAT and firewalls by mGuard firmware. Even inexperienced users can install them, whether it’s a new subnet (with routing and NAT) or an existing network (as a transparent device). FL mGuard 1102 and FL mGuard 1105's stateful inspection firewall with gigabit interface is ideal for basic security at high data transfer rates. Easy Protect Mode blocks outside access with just a wire jumper and with no virtual configuration required.
Phoenix Contact
Serial gateway with web server
DeviceMaster serial gateways have an integrated web server for configuring serial communications, setting port parameters, and integrating serial devices into TCP/IP and Ethernet-based fieldbus protocols. One gateway can communication with many serial devices at the same time via RS-232, RS-422 and RS-485 protocols, as well as Modbus RTU and ASCII. DeviceMaster servers and gateways are available with one to 32 serial ports with DB9 or terminal block connectors for DIN rail, panel and rack mounting.
Pepperl+Fuchs
LioN-X IO-Link master has fast, reliable, secure data collecting, converting and transmitting, and complies with IO-Link, V1.1.3. Its two variations are LioN-X for maximum performance and cost-effective LioN-Xlight. They feature versatile protocol communication and easy digital I/O and IO-Link connections; LioN-Management Suite V2.0 software for configuration; fast data transfer with about 1-ms cycle times; security from Achilles and vulnerability-tested data transmission; and M12 Power L-coded connectors.
Belden
ThingWorx Kepware Edge software allows the most valuable features of KEPServerEX software to be deployed in Linux-based environments, enabling connectivity directly at the site of the machine, device or sensor. It uses secure, efficient, IoT-ready protocols such as OPC UA or MQTT to connect to local, remote and cloud-based applications or platforms. ThingWorx Kepware Edge offers flexible deployment of Kepware functionality for improved connectivity to geographically distributed devices and machines.
PTC
Handheld Ethernet cable tester
LinkIQ-IE cable-and-network, Ethernet tester troubleshoots network cabling. By combining cable measurement technology and basic tests for Ethernet switches, LinkIQ-IE speeds and simplifies discovery of network failures in a simple, touchscreen interface. LinkIQ-IE uses a single-test that automatically provides appropriate measurements based on what’s at the other end of the cable. LinkIQ-IE features an RJ-45 type connector and includes cabling and adapters that simplify interfacing with M12-D, M12-X and M8-D connectors.
Fluke
netTAP gateways use netX multi-protocol chips to securely transfer and convert data between two automation networks. netTAP 50 integrates one field device into a higher-level network with protocol conversions for real-time Ethernet, fieldbus and serial. netTAP 100 dual-channel gateway supports two-port protocol conversions with slave and master functions in any network protocol combination. netTAP 151 bridges any two real-time Ethernet networks, including EtherNet/IP, Profinet, EtherCAT and Sercos.
Hilscher North America Inc.
630-505-5301
Anybus Communicator gateways for serial to fieldbus and Ethernet connectivity link up to 31 nodes without affecting network performance and without any hardware or software changes, and let users easily convert devices to more modern networks. Anybus Communicators convert almost any RS-232/422/485 request/response or produce/consume protocol, such as Modbus RTU, ASCII, DF1, CAN-based or user-specific, and require no PLC function blocks or any programming.
HMS Networks
Interface with up to 64 channels
Two new Ethernet, remote I/O modules interface up to 64 channels with a mix of signal types using one IP address. BusWorks NT2000 series I/O modules provide Modbus TCP/IP communication of analog voltage, current, thermocouple and discrete signals. NTE Ethernet I/O models are 25 mm wide with dual RJ45 ports, a webserver, and up to 16 I/O channels. An integrated DIN rail bus can connect three NTX expansion I/O modules, each adding up to 16 more I/O channels.
acromag
IX15 programmable gateway connects Digi XBee-enabled devices to remote applications via cellular and Ethernet for users seeking lower-cost designs for their networks. Its C1D2 certification and a rugged enclosure allow for use in harsh, corrosive environments. The gateway also has a simple, open-source Python development environment that enables custom applications to perform edge computing locally, while providing optimal, resilient connectivity between an XBee network and cloud-based applications.
Digi-Key Electronics
This line of lean, managed switches is a cost-effective solution for industrial networking. They come with an easy-to-use, dynamic web-based dashboard and topology mapping for instant updates on network status and system health. Features include tools for network performance, security and availability. There are several variants available, and all come with 1-GB RJ45 ports and a choice of eight or 16 ports, as well as two supplementary fiber-optic ports.
Wago
HES HART-to-Ethernet gateway system converts signals from up to 64 wired HART devices to Ethernet Modbus/TCP and HART-IP. It allows HART transmitters and smart valves to interface directly with Modbus/TCP monitoring and control systems over Ethernet, with field device data viewable in any web browser via its built-in web server. HES is available in a single-channel or four-channel configuration. HES also supports communication with HART 5, 6 and 7 field devices, and supports HART-IP.
Moore Industries-International Inc.
Gigabit and standard ports let TBEN-Lx-SE-M2 rugged, IP67-rated, managed Ethernet switches be used directly on machines, which lets users configure, manage and monitor connected devices remotely, outside of control cabinets. TBEN-Lx-SE-M2 features IP67/IP69K ratings; wide operating temperature range; 8-30 VDC voltage range; cut-through forwarding; port-based IP address allocation; network load monitoring; line diagnostics; RSTP media redundancy; NAT routing; and a firewall.
turck
EK9500 bus coupler connects EtherNet/IP networks to EL series EtherCAT I/O terminals and machine-mountable EtherCAT box modules. The coupler converts EtherNet/IP telegrams to EtherCAT E-bus standard. This enables connection of EtherCAT devices to EtherNet/IP masters, real-time 100 Mbps transfer rates, connection via 2 x RJ45 (switched) interfaces, automatic device addressing with EtherCAT and ADS, and simple configuration. A typical segment consists of an EK9500 and up to 255 I/O terminals.
Beckhoff Automation
Plug-and-play Ethernet switches
Unmanaged switches provide a simple, cost-effective method for expanding Ethernet networks. These plug-and-play switches provide convenient mounting in control panels, low-voltage power wiring, improved EMC compliance, 24V AC/DC power and reliability. Their switch enclosures are metal and intended for direct panel, rack or DIN-rail mounting. No configuration is necessary. All copper ports automatically configure their data rates and duplex using auto-negotiation protocol.
Contemporary Controls
630-963-7070
MXview Wireless add-on module combined with MXview industrial network management software visualizes networks, and helps non-IT staff simplify operations and improve network uptime. The wireless module fulfills requirements of static and dynamic wireless applications, and gives users detailed device information and performance indicator charts for individual AP and client devices from a device dashboard. It also has a dynamic topology view of the status of wireless links and connection changes.
moxa
LP1-E45UM-5 low-profile, panel-interface connector frees DIN-rail space by moving the unmanaged Ethernet switch to the side of the cabinet, where it's combined with a low-profile panel interface housing for quick, easy, secure access to Ethernet components in the cabinet. LP1-E45UM-5 offers one RJ45 port outside the cabinet and four RJ45 ports inside the cabinet. They also feature four, fast, 10/100Base-T(X) RJ45 connectors with broadcast-storm protection. Their operational temperature range is -10 to 70 °C.
mencom
Unmanaged switch with managed features
SX5E-HU085B eight-port, unmanaged Ethernet switch provides managed switch features to support Ethernet and IIoT devices. No software configuration is needed, and it features quality of service (QoS) networking to handle critical EtherNet/IP packets first; IGMP snooping to reduce network traffic; and broadcast storm protection. SX5E runs at 10 and 100 Mbps with auto negotiation of speed, while every port automatically adjusts for straight-through or crossover cable connections. SX5E operates at -40 to 75 °F.
IDEC Corp.
Gigabit Security industrial Ethernet provides secure, reliable communication between Ethernet devices and higher-level networks. It features 2 Gigabit ports (LAN/WAN); an integrated firewall; NAT masquerading with 1:1 network mapping and port forwarding; remote access via VPNs; key switch function for activation/deactivation of WAN/VPN links; variant with integrated 3G/UMTS modem for rapid, Internet-based wireless access; backup and recovery of configurations using a SIM card; and a full-layer 2/3 router.
Weidmüller
W4S1 industrial switching hub is a five-port switch with a quality of service (QoS) function that's optimized for EtherNet/IP, and ensures timing of control data even under high network traffic conditions. W4S1 features a store-and-forward system, 125 KB buffer, failure and data-storm detection, push-in power connectors, and low power consumption. W4S1 is also available in a low-cost, three-port model that can be used as easily as a T-branch.
Omron Automation Americas
800-556-6766
Leaders relevant to this article: