SSX and SST Safety Isolators and Splitters from Moore Industries provide reliable isolation and signal conversion for HART® data in functionally safe process control settings. Part of Moore Industries’ FS FUNCTIONAL SAFETY SERIES, the two-wire (loop powered) SSX and four-wire (line/mains powered) SST have been certified by exida for single use in Safety Instrumented Systems up to SIL 2. They were designed and built from the ground up to the strict IEC 61508:2010 standards for safety-related applications.
The SSX and SST protect safety systems by isolating a SIS from basic process control or monitoring systems so that disconnections or other failures don’t impact the safety system. It also has 1500Vrms of isolating capability to protect safety I/O cards and systems from surges, spikes and transients in the field. Standard 20V/m RFI and EMI protection stops damages caused by radio frequencies and electromagnetic interference.
While most isolators “strip off” HART data, the SSX and SST pass along HART data to asset management systems, programming devices or host systems. In addition, the SSX stops ground loop noise and solves “bucking” power supply problems caused when two devices try to source power to the same loop.
Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...
