1660601716567 Mooreindustriesproductphoto1802

Moore Industries’ HCS HART Concentrator System Performs HART-to-MODBUS RTU Conversion

Feb. 21, 2018
When operating in point-to-point and digital multidrop HART networks, the HCS acts as a HART master and monitors a single or multiple HART smart instruments.
The HCS HART Concentrator System converts a HART digital signal to serial (RS-485 or RS-232) MODBUS RTU communication protocol. This allows HART transmitters and valves to interface directly with MODBUS-based monitoring and control systems.

When operating in point-to-point and digital multidrop HART networks, the HCS acts as a HART master and monitors a single or multiple HART smart instruments. All process and diagnostic data carried on the HART data string is converted to MODBUS RTU.

In a digital multidrop HART network, up to 16 HART instruments digitally communicate on the same wires. The HCS can be set to monitor any or all instruments and/or valves within the network. Only one MODBUS address, and one communication link (such as twisted wire pair), is needed to send the process and diagnostic data from up to 16 HART devices to a MODBUS host.

The HCS works with every HART-compatible device including smart multivariable mass flow, pressure, pH and temperature transmitters; coriolis, magnetic, ultrasonic and vortex flow meters; radar and hydrostatic level transmitters; valve positioners and damper operators.

All HART process information, including primary, second, third and fourth process variables are converted to MODBUS RTU and available to the MODBUS host system.

For more information, please visit the Moore Industries website.

Sponsored Recommendations

Municipalities are utilizing inline total solids measurements to enhance sludge thickening, lower polymer usage and cut operational expenses.
Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...