• 1660602980330 Cg1204wastewater

    Water Collection and Treatment Applications Case Studies

    April 23, 2012
    Executive Editor Jim Montague Writes Two Case Studies Featuring the Water Production Dept. in Enid Ok. and Ontario-Based Windsor Utilities Commission (WUC) on Water Collection and Treatment Applications

    HMI/SCADA Software Aids Water/Wastewater Revamp
    This case study is about Enid, Oklahoma's Water Production and Technical Services Departments, who are building a new plant, planning a reservoir and adding a variety of efficient process controls to manage its expanding production and treatment facilities, including the implementation of Iconics' Genesis64 HMI/SCADA software.
    Read the full case study.

    Windsor Utilities Commission (WUC) Case Study
    The Ontario-based Windsor Utilities Commission (WUC), needed some new controls to maintain the reliability of its water production system. For its upgrade, it is using Rockwell Automation's ControlLogix PACs and FactoryTalk VantagePoint software.

    About the Author

    Jim Montague | Executive Editor

    Jim Montague is executive editor of Control. 

    Email

    Continue Reading

    Sponsored Recommendations

    Municipalities are utilizing inline total solids measurements to enhance sludge thickening, lower polymer usage and cut operational expenses.
    Carbon dioxide is increasingly recognized as a vital resource with significant economic potential. While the conversion of carbon dioxide into products is still in its infancy...
    Discover our wide range of temperature transmitters that convert sensor signals from RTDs and thermocouples into stable and standardized output signals!
    An innovative amine absorption-based carbon capture process enables retrofitting of existing industrial facilities to reduce emissions in hard-to-abate sectors, with advanced ...

    Latest from Systems Integration

    Some Relief, But Snags Persist
    Hargrove Logo Color
    Dave Smit, senior systems analyst at Interstates (right), examines the network traffic dashboard and communication settings in Veracity OT Network Controller software at the system integrator’s prefabrication shop in Sioux Center, Iowa, while Jace Mulder, production technician (left), operates the Haco press break. OT Network Controller manages a software-defined network (SDN) switch from Dynics, and uses zero-trust and deny-by-default methods, which enables Interstates to improve network visibility and security for the machine and enhance operational efficiency. Source: Interstates

    Most Read

    Sponsored