Now, near and next & the benefits of proper partnership

At the OEM Leader-to-Leader Summit at Automation Fair, executives framed the road ahead for machine builders around “Now, Near and Next”

Produced with support from Rockwell Automation

This show takeover was sponsored by our Automation Fair coverage partner, Rockwell Automation. See more coverage on our Automation Fair page.

During its OEM Leader-to-Leader Summit at Automation Fair 2026 in Boston, speakers—representing Rockwell Automation and its original equipment manufacturers (OEMs) partners—described next decade as one that will favor suppliers who cut complexity.

Rockwell Automation intends to be that partner for everything from design software to cybersecurity.

Evan Kaiser, Rockwell Automation’s vice president for global industry accounts, OEM, served as host and presenter and kicked off the half-day long summit by explaining the focus of the industry from “now, near and next” and his fellow presenters picked up the narrative.

Now: complexity and pressure on producers

Rockwell Automation Chairman and CEO Blake Moret, who started at the company as an intern in 1984 and has led it for more than 10 years, said a board interviewer once asked why automation would grow faster than the economy. His answer was “complexity.” Plant managers are “haunted” by projects that went wrong because integration with existing systems was underestimated, he explained.

Simplifying design, virtual commissioning, operations and maintenance, he added, will separate winners from losers. He pointed to Rockwell Automation’s design and simulation tools, including FactoryTalk Design Studio, Emulate3D digital twin software, and FactoryTalk Optix edge visualization software, and to AI agents that reach third-party software through MCP servers, to speed engineering work.

Machine builders account for roughly a third of Rockwell Automation’s business, probably closer to 40%, Moret said, and that segment grew significantly faster than the company average last year. He urged attendees to challenge their local Rockwell teams to put the new technology into their own machine-design cycles.

Sean Sims, vice president of automation and solutions at Tetra Pak, then explained what those machine builders and their customers are up against. Many consumers know the company from the cartons on supermarket shelves, but Sims said the carton is the end of a long journey that includes planting, processing, packaging, transport and storage. Tetra Pak’s mission, he said, is making food safe and available everywhere. It operates in more than 160 countries and has 51 production plants that make packaging material and food-processing equipment rather than food itself.

Sims described the company’s work as “advanced food production systems,” collaboration with producers across the full path to the table: food innovation, recipe formulation, pilot plant testing, scale-up, processing, packaging, logistics and service. Its verticals include dairy, cheese, ice cream, powders, beverages, fruit, supplements, nutrition and plant-based foods. Customers range from multinationals such as Nestlé, PepsiCo and Coca-Cola to regional players in markets such as China and Arabia, to agricultural cooperatives. That scale, he said, shapes the company’s decisions on automation and digital infrastructure.

Those producers, Sims said, face four consistent pressures:

  • Cost. Years of high inflation have hit producers hard, making cost of ownership critical.
  • Agility and regulation. Shifting consumer tastes demand more flexible equipment, while safety, quality and food-security rules keep evolving. In many countries food production is treated as critical infrastructure.
  • Workforce. A premium co-packer in Germany told Sims its factory operations team had seen 25% to 37% churn over three years. Plants once had 20- to 25-year veterans who could diagnose a failing machine by its sound; that experience is hard to replace.
  • Aging facilities. Many plants were built 25 or 30 years ago and were never designed for modern agile manufacturing, leaving a constant tension between where they are and where they need to be.

Everything Tetra Pak does in automation and digital, Sims said, is aimed at those challenges.

Near: cyber-compliance becomes a design requirement

Kaiser returned to the stage and focused on the nearest-term challenge: cybersecurity regulation, particularly the EU Cyber Resilience Act (CRA). Design standards such as IEC 62443, he said, ask whether a builder’s design process is secure, including how designs are stored and who can access them. The bar for claiming compliance is rising.

The CRA also stretches responsibility far beyond shipment. Kaiser said builders are on the hook for a minimum of five years, with debate over whether it could extend to the machine’s full lifecycle.

“Once it leaves my door, I don’t have to worry about it. That’s not true anymore,” he said, adding that end users already expect lifecycle commitments.

Security and safety, he argued, can no longer be separated: a machine is not safe if someone can tamper with its safety system. Safety is also static, while cyber-threats change daily, as new vulnerabilities appear.

Rockwell Automation’s answer is SecureOT, a cybersecurity platform built specifically for OEMs. Kaiser said cybersecurity starts with an assessment, and he suspected most builders could not perform one on every device in a machine. He described four components:

  • Local deployment. The server runs in the OEM’s own environment, not the cloud, which addresses concerns about protecting intellectual property. Rockwell’s cyber-knowledge is built into it.
  • Cyber-assessment. When a machine is plugged in, an agent checks everything connected, Rockwell or not. Kaiser noted that when he started at Rockwell 34 years ago, the company’s Data Highway Plus network was closed; today, he said, openness makes a vendor-agnostic tool essential. Each device gets a green, yellow or red rating, and unfamiliar equipment, like an odd printer, is flagged. This replaces the impractical alternative of searching every device and firmware version by hand.
  • System summary. A record of the machine’s as-shipped cyber-posture, covering the risk assessment, known vulnerabilities and the vulnerable assets. It lets builders show customers the due diligence they did. Kaiser said most successful attacks come through back doors nobody knew about, not the front door.
  • Fleet management. With a continuous connection, the server can flag changes and newly discovered vulnerabilities as they arise, including unauthorized changes by someone on the customer’s side. Kaiser joked that there is always a “Smitty in the back room” who changes something and has since left the company. With an intermittent connection, which he considers more likely, the tool can assess components whenever the customer opens access and compare against the system summary.

Kaiser was careful about the limits. SecureOT does not retire risk, he said. It is like an OEE dashboard, showing where the problems are without solving them. He noted that some security features come down to ticking a box in a device’s configuration, and that is worth doing, but it does not solve the whole problem. Pricing is per asset and drops as volume rises, which he said is meant to make adoption easy.

“You want to win at OEMs? Make it easy,” he said, acknowledging that the talk was a sales pitch.

Next: AI and autonomy

Looking ahead, Moret described combining Rockwell’s established strengths with new capabilities so customers “don’t see daylight” between them. That includes Logix controllers acting as the brain for robots, line control run on the same technology, and partnerships such as Nvidia’s so builders can add heavy computing power without disrupting existing architectures.

The summit’s message was that success will depend less on any single product than on a supplier that can cover design, deployment and long-term lifecycle obligations. Or, as Kaiser put it, “If I’m going to be a partner with OEMs, I can’t be a partial partner.”

About the Author

Len Vermillion

Len Vermillion

Editor in Chief

Len Vermillion is editor-in-chief of Control.