• Home >
  • Back Issues >
  • Control >
  • April 2026
  • April 2026

    Perhaps the surest sign of a true engineer is someone who recognizes their work is never quite done. That's truly the case for this year's three inductees into Control's Process Automation Hall of Fame. While each has had long and notable careers - buoyed by their ingenuity, willingness to adapt and appreciation for their mentors and colleagues - they share a common goal going forward - to pass their knowledge on to the next generation of great control engineers.

    More content from April 2026

    Some of the best known and reportedly most widely applied solutions
    April 23, 2026
    S. Joe Qin’s journey through process automation focused on data, discipline and the duty to give back
    April 22, 2026
    Sponsored
    FDI delivers a unified, vendor- and protocol-independent platform that simplifies configuration, monitoring and lifecycle management of intelligent devices while enabling advanced...
    April 14, 2026
    Sponsored
    Yokogawa’s Bio Pilot helps life sciences bridge fragmented systems and manual workflows
    April 13, 2026
    Designed for super low-temperature cold boxes in air-separation, LNG and hydrogen processes, Fisher IC2 top-entry, cryogenic globe valve limits leaks and energy loss
    April 9, 2026
    Manfred Morari’s career shows how mentorship and collaboration shape success
    April 7, 2026
    OpreX Robot Management Core software will join ANYbotics’ software and four-legged ANYmal inspection robots
    April 7, 2026
    Endress+Hauser
    ehtm611_image
    Endress+Hauser’s iTherm SurfaceLine TM611 for fast flows, high pressures, corrosive or abrasive media, and narrow pipes
    April 7, 2026
    The planned spinoff from Hexagon solves and simplifies complexity
    April 6, 2026
    AutomationDirect’s ProSense HUM offers -4 to 140 °F and 0 to 99.9% RH ranges
    April 6, 2026
    VEGA’s Vegapoint level switches conform to FDA, EC 1935/2004, GMP and GB
    April 3, 2026
    Best practices for accurate process analytics, sensor selection and installation
    April 2, 2026
    Lima and Bogotá facilities will help deliver safety automation across Latin America
    April 2, 2026
    Pepperl+Fuchs
    lvl_m3_m4_hires_pf
    Pepperl+Fuchs’ Vibracon LVL-M3 and LVL-M4 distinguish medium from foam, air bubbles or deposits
    April 2, 2026
    Gems’ RFO flow-rate monitors handle pressures up to 500 psi
    April 1, 2026
    Hawk’s FPM targets ±3 mm accuracy and 1.0 mm resolution performance
    March 31, 2026
    It takes a lifetime of dedicated practice to become an expert in control engineering, and a little help from your peers
    March 31, 2026
    ABB’s P-300 measures from 0.05 kPa in dP and up to 105 MPa
    March 30, 2026
    BinMaster’s CNCR-400 uses 80 GHz radar for 5 mm accuracy
    March 27, 2026
    Migatron’s RPS-429AA-80P-IS2 has an IP66/IP67-rated enclosure
    March 26, 2026
    Krohne’s Optiwave 1500 has a narrow 4° beam angle and almost no dead zone
    March 25, 2026
    Part three of this three-part series on justifying improved control via economics shows how simulation can quantify reduced variation from better control, and how to assess its...
    March 24, 2026
    Custom designs available for flashing/boiling, high vibration and extreme temperatures
    March 24, 2026
    Lumenite’s LASC series has self-calibrating, auto-sensitivity, eliminates manual adjustment
    March 23, 2026
    ISA-112 Part 1 provides a framework for modernizing SCADA systems, and making them easier to design, build, operate and maintain
    March 17, 2026
    As artificial intelligence (AI) proliferates, it’s imperative to deploy an orchestration layer to thoughtfully add to human expertise
    March 4, 2026